stdClass Object
(
    [id] => 2063
    [title] => SCORPIO S.R.P
    [software] => 
    [version] => 
    [description] => The Scorpio S.R.P was designed and engineered to be the ultimate multi-purpose search and recovery platform. The design freedom facilitated by additive manufacturing allowed the design to be as lightweight as possible while enhancing the structural optimization to as much as the build material allowed.

This design was inspired by a creature of nature, the scorpion. The design was initially designed around the crab, but was exceeded by the scorpion because of the added benefit of the tail for the system to be truly successful.

With its highly configurable and modular design, the accessories can be fitted to the drone with the tools needed for the mission. Here are a few scenarios that the Scorpio S.R.P is suited for:

1. Search Missions
In the event of, for instance, a plane crash in the mountains at night, the Scorpio S.R.P drone can be launched ahead of rescuers because of difficult terrain to locate the crash site and ultimately survivors quickly and efficiently. The system can be configured with a night vision camera and a whole range of sensors such as infrared and radar to make the search mission an easier task. In the tail are four (4) locator beacons which are activated when deployed when survivors or the crash site is found. The drone then continues to find other sites of interest to deploy more beacons making the job of the rescuers a lot easier.


2. Recovery Missions
In a situation where small objects are located in areas that are dangerous and difficult for humans to reach, the Scorpio S.R.P drone is suitable to recover these items. For instance, if evidence of a crime or accident is located up high in a tree or far down in a crevasse, the use of the two forward claws and lower leg crane are more than sufficient for the job.




These are only a few applications of the Scorpio S.R.P made only possible with additive manufacturing. Here are a few extra things I'd like to mention:

1. Even though the structure will be optimized based on the build material for mass and strength, the added electronics and batteries will decrease the useful payload, range and run time of the drone. Using my experience as an aircraft engineer, my suggestion would be to modify the airframe of the drone to accommodate a more powerful powerplant of up to 9" props, keeping the rest of the airframe relatively the same. Prototype testing would determine the optimum configuration.

2. The components of the Scorpio S.R.P would need to be sized appropriately with each other for proper weight and balance characteristics. The Horus Kestrel 3D is the perfect drone for this system mainly because the tail does not interfere with the rear props.

3. This Scorpio S.R.P model was not made with any particular electronics in mind and would therefore need to be redesigned once they are selected.

Thank you Fathom for facilitating such an awesome challenge and I hope this system is further developed and actually go into service saving many lives.

    [viewerfile] => scorpio_fully_loaded.STEP
    [video] => 
    [access] => 0
    [added] => 2017-05-16 21:50:42
    [updated] => 2017-05-16 21:50:42
    [uid] => 5451
    [tags] => droneaccessory, unmakeable, horus, quadcopter, scorpion, search, recovery, rescue, drone, printed, 3d
    [classification] => 3
    [permalink] => scorpio-srp
    [status] => 1
    [user] => stdClass Object
        (
            [uid] => 5451
            [name] => Winston Jennings
            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
            [email] => sendreplies@yahoo.com
            [admin] => 0
            [staff] => 0
            [volunteer] => 0
            [created] => 2015-01-10 19:46:14
            [access] => 2017-02-28 09:55:40
            [login] => 2017-12-10 00:16:58
            [status] => 1
            [timezone] => 
            [language] => en-us
            [hash] => 
            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
            [picture] => 5451.jpg
            [init_email] => sendreplies@yahoo.com
            [first_name] => Winston
            [last_name] => Jennings
            [country] => JM
            [region] => 01
            [city] => Kingston
            [zipcode] => 876
            [privacy] => 1
            [job_function] => Engineering, Design
            [industry] => Engineering/Tech Design Services
            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
            [software_often] => 21
            [opt-in] => 
            [joined_with] => 
            [permalink] => mrjentis
            [updated] => 2017-03-29 16:37:42
            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
            [pass_code_created] => 2015-08-10 14:36:13
            [pass_code_used] => 2015-08-10 14:32:49
            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
            [exchangeSetting] => 1
            [onshape] => 
            [company_name] => 
            [address] => 
            [address2] => 
            [deskeng] => 
            [contract_work] => 1
            [machinedesign] => 
            [software_often_text] => SOLIDWORKS
            [experience] => 
            [education] => 
            [certifications] => Array
                (
                    [0] => stdClass Object
                        (
                            [id] => 297
                            [uid] => 5451
                            [type] => Certified Solidworks Professional - Mechanical Design
                            [number] => License C-3ACTMB6VS9
                            [recieved] => 2014
                            [added] => 2015-01-10 19:54:01
                            [updated] => 2015-01-10 19:54:01
                        )

                    [1] => stdClass Object
                        (
                            [id] => 298
                            [uid] => 5451
                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                            [number] => License C-UHGP5H4F6X
                            [recieved] => 2014
                            [added] => 2015-01-10 19:54:32
                            [updated] => 2015-01-10 19:54:32
                        )

                    [2] => stdClass Object
                        (
                            [id] => 299
                            [uid] => 5451
                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                            [number] => License C-9XG262PFEK
                            [recieved] => 2014
                            [added] => 2015-01-10 19:54:59
                            [updated] => 2015-01-10 19:54:59
                        )

                    [3] => stdClass Object
                        (
                            [id] => 300
                            [uid] => 5451
                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                            [number] => License C-HG6F5YWFZ3
                            [recieved] => 2014
                            [added] => 2015-01-10 19:55:21
                            [updated] => 2015-01-10 19:55:21
                        )

                    [4] => stdClass Object
                        (
                            [id] => 301
                            [uid] => 5451
                            [type] => Certified Solidworks Professional – Advanced Surfacing
                            [number] => License C-GDEGS7J5QW
                            [recieved] => 2014
                            [added] => 2015-01-10 19:56:24
                            [updated] => 2015-01-10 19:56:24
                        )

                    [5] => stdClass Object
                        (
                            [id] => 302
                            [uid] => 5451
                            [type] => Certified Solidworks Professional – Advanced Weldments
                            [number] => License C-MR93VXJDD6
                            [recieved] => 2014
                            [added] => 2015-01-10 19:56:46
                            [updated] => 2015-01-10 19:56:46
                        )

                    [6] => stdClass Object
                        (
                            [id] => 303
                            [uid] => 5451
                            [type] => Certified Solidworks Professional - Simulation
                            [number] => License C-PP42LSNA3X
                            [recieved] => 2014
                            [added] => 2015-01-10 19:57:08
                            [updated] => 2015-01-10 19:57:08
                        )

                )

            [notifysubscribe] => Array
                (
                    [id] => 3987
                    [uid] => 5451
                    [friend_request] => 0
                    [receive_message] => 0
                    [model_3d_view] => 0
                    [model_comment] => 0
                    [model_request] => 0
                    [group_invite] => 0
                    [group_post] => 0
                    [group_post_comment] => 0
                    [model_upload_friend] => 0
                    [model_upload_follow] => 0
                    [3dx_mktg_comm] => 1
                    [3dx_member_updates] => 0
                    [3dx_member_news] => 0
                    [3dx_supplier_comm] => 0
                    [updated] => 2017-03-29 16:37:42
                )

        )

    [viewerFileId] => 8889
    [mainImage] => process 2.91.png
    [showViewer] => 1
    [model3dLink] => 
    [modelFiles] => Array
        (
            [0] => stdClass Object
                (
                    [id] => 8891
                    [uid] => 5451
                    [nid] => 2063
                    [aid] => 0
                    [filepath] => /var/www/html/content/files/models/2063/scorpio_srp_carry.STEP
                    [filename] => scorpio_srp_carry.STEP
                    [format] => STEP
                    [size] => 136570282
                    [mainImage] => 0
                    [date] => 2017-05-16 20:50:34
                    [is_3D] => 1
                    [version] => 
                    [software] => 38
                    [is_image] => 
                    [numDownloads] => 14
                )

            [1] => stdClass Object
                (
                    [id] => 8889
                    [uid] => 5451
                    [nid] => 2063
                    [aid] => 0
                    [filepath] => /var/www/html/content/files/models/2063/scorpio_fully_loaded.STEP
                    [filename] => scorpio_fully_loaded.STEP
                    [format] => STEP
                    [size] => 129422502
                    [mainImage] => 0
                    [date] => 2017-05-16 20:25:50
                    [is_3D] => 1
                    [version] => 
                    [software] => 38
                    [is_image] => 
                    [numDownloads] => 4
                )

            [2] => stdClass Object
                (
                    [id] => 8899
                    [uid] => 5451
                    [nid] => 2063
                    [aid] => 0
                    [filepath] => /var/www/html/content/files/models/2063/scorpio_fully_loaded_crane_extend.STEP
                    [filename] => scorpio_fully_loaded_crane_extend.STEP
                    [format] => STEP
                    [size] => 129348340
                    [mainImage] => 0
                    [date] => 2017-05-16 21:50:30
                    [is_3D] => 1
                    [version] => 
                    [software] => 38
                    [is_image] => 
                    [numDownloads] => 3
                )

            [3] => stdClass Object
                (
                    [id] => 8898
                    [uid] => 5451
                    [nid] => 2063
                    [aid] => 0
                    [filepath] => /var/www/html/content/files/models/2063/scorpio_fully_loaded_sectioned.STEP
                    [filename] => scorpio_fully_loaded_sectioned.STEP
                    [format] => STEP
                    [size] => 113053991
                    [mainImage] => 0
                    [date] => 2017-05-16 21:48:06
                    [is_3D] => 1
                    [version] => 
                    [software] => 38
                    [is_image] => 
                    [numDownloads] => 2
                )

            [4] => stdClass Object
                (
                    [id] => 8897
                    [uid] => 5451
                    [nid] => 2063
                    [aid] => 0
                    [filepath] => /var/www/html/content/files/models/2063/scorpio_srp_accessories.STEP
                    [filename] => scorpio_srp_accessories.STEP
                    [format] => STEP
                    [size] => 80039018
                    [mainImage] => 0
                    [date] => 2017-05-16 21:37:08
                    [is_3D] => 1
                    [version] => 
                    [software] => 38
                    [is_image] => 
                    [numDownloads] => 1
                )

            [5] => stdClass Object
                (
                    [id] => 8860
                    [uid] => 5451
                    [nid] => 2063
                    [aid] => 0
                    [filepath] => /var/www/html/content/files/models/2063/Base Assembly.STEP
                    [filename] => Base Assembly.STEP
                    [format] => STEP
                    [size] => 35151063
                    [mainImage] => 0
                    [date] => 2017-05-16 19:46:55
                    [is_3D] => 1
                    [version] => 
                    [software] => 38
                    [is_image] => 
                    [numDownloads] => 2
                )

            [6] => stdClass Object
                (
                    [id] => 8859
                    [uid] => 5451
                    [nid] => 2063
                    [aid] => 0
                    [filepath] => /var/www/html/content/files/models/2063/Housing.STEP
                    [filename] => Housing.STEP
                    [format] => STEP
                    [size] => 20509583
                    [mainImage] => 0
                    [date] => 2017-05-16 19:36:39
                    [is_3D] => 1
                    [version] => 
                    [software] => 38
                    [is_image] => 
                    [numDownloads] => 1
                )

            [7] => stdClass Object
                (
                    [id] => 8890
                    [uid] => 5451
                    [nid] => 2063
                    [aid] => 0
                    [filepath] => /var/www/html/content/files/models/2063/Tail Assembly Curved.STEP
                    [filename] => Tail Assembly Curved.STEP
                    [format] => STEP
                    [size] => 14898428
                    [mainImage] => 0
                    [date] => 2017-05-16 20:31:42
                    [is_3D] => 1
                    [version] => 
                    [software] => 38
                    [is_image] => 
                    [numDownloads] => 1
                )

            [8] => stdClass Object
                (
                    [id] => 8896
                    [uid] => 5451
                    [nid] => 2063
                    [aid] => 0
                    [filepath] => /var/www/html/content/files/models/2063/Tail Assembly Straightened.STEP
                    [filename] => Tail Assembly Straightened.STEP
                    [format] => STEP
                    [size] => 14892717
                    [mainImage] => 0
                    [date] => 2017-05-16 20:57:25
                    [is_3D] => 1
                    [version] => 
                    [software] => 38
                    [is_image] => 
                    [numDownloads] => 0
                )

            [9] => stdClass Object
                (
                    [id] => 8861
                    [uid] => 5451
                    [nid] => 2063
                    [aid] => 0
                    [filepath] => /var/www/html/content/files/models/2063/Tail Assembly Straightened_exploded.STEP
                    [filename] => Tail Assembly Straightened_exploded.STEP
                    [format] => STEP
                    [size] => 14890724
                    [mainImage] => 0
                    [date] => 2017-05-16 19:49:19
                    [is_3D] => 1
                    [version] => 
                    [software] => 38
                    [is_image] => 
                    [numDownloads] => 0
                )

            [10] => stdClass Object
                (
                    [id] => 8878
                    [uid] => 5451
                    [nid] => 2063
                    [aid] => 0
                    [filepath] => /var/www/html/content/files/models/2063/18.png
                    [filename] => 18.png
                    [format] => PNG
                    [size] => 852420
                    [mainImage] => 0
                    [date] => 2017-05-16 19:51:33
                    [is_3D] => 0
                    [version] => 
                    [software] => 
                    [is_image] => 1
                    [numDownloads] => 1
                )

            [11] => stdClass Object
                (
                    [id] => 8895
                    [uid] => 5451
                    [nid] => 2063
                    [aid] => 0
                    [filepath] => /var/www/html/content/files/models/2063/181.png
                    [filename] => 181.png
                    [format] => PNG
                    [size] => 852420
                    [mainImage] => 0
                    [date] => 2017-05-16 20:53:18
                    [is_3D] => 0
                    [version] => 
                    [software] => 
                    [is_image] => 1
                    [numDownloads] => 1
                )

            [12] => stdClass Object
                (
                    [id] => 8863
                    [uid] => 5451
                    [nid] => 2063
                    [aid] => 0
                    [filepath] => /var/www/html/content/files/models/2063/1.png
                    [filename] => 1.png
                    [format] => PNG
                    [size] => 755413
                    [mainImage] => 0
                    [date] => 2017-05-16 19:49:34
                    [is_3D] => 0
                    [version] => 
                    [software] => 
                    [is_image] => 1
                    [numDownloads] => 1
                )

            [13] => stdClass Object
                (
                    [id] => 8886
                    [uid] => 5451
                    [nid] => 2063
                    [aid] => 0
                    [filepath] => /var/www/html/content/files/models/2063/151.png
                    [filename] => 151.png
                    [format] => PNG
                    [size] => 577871
                    [mainImage] => 0
                    [date] => 2017-05-16 20:05:37
                    [is_3D] => 0
                    [version] => 
                    [software] => 
                    [is_image] => 1
                    [numDownloads] => 0
                )

            [14] => stdClass Object
                (
                    [id] => 8881
                    [uid] => 5451
                    [nid] => 2063
                    [aid] => 0
                    [filepath] => /var/www/html/content/files/models/2063/101.png
                    [filename] => 101.png
                    [format] => PNG
                    [size] => 473093
                    [mainImage] => 0
                    [date] => 2017-05-16 20:05:16
                    [is_3D] => 0
                    [version] => 
                    [software] => 
                    [is_image] => 1
                    [numDownloads] => 0
                )

            [15] => stdClass Object
                (
                    [id] => 8892
                    [uid] => 5451
                    [nid] => 2063
                    [aid] => 0
                    [filepath] => /var/www/html/content/files/models/2063/51.png
                    [filename] => 51.png
                    [format] => PNG
                    [size] => 432712
                    [mainImage] => 0
                    [date] => 2017-05-16 20:53:12
                    [is_3D] => 0
                    [version] => 
                    [software] => 
                    [is_image] => 1
                    [numDownloads] => 0
                )

            [16] => stdClass Object
                (
                    [id] => 8862
                    [uid] => 5451
                    [nid] => 2063
                    [aid] => 0
                    [filepath] => /var/www/html/content/files/models/2063/process 2.91.png
                    [filename] => process 2.91.png
                    [format] => PNG
                    [size] => 380509
                    [mainImage] => 1
                    [date] => 2017-05-16 19:49:24
                    [is_3D] => 0
                    [version] => 
                    [software] => 
                    [is_image] => 1
                    [numDownloads] => 1
                )

            [17] => stdClass Object
                (
                    [id] => 8864
                    [uid] => 5451
                    [nid] => 2063
                    [aid] => 0
                    [filepath] => /var/www/html/content/files/models/2063/2.png
                    [filename] => 2.png
                    [format] => PNG
                    [size] => 359869
                    [mainImage] => 0
                    [date] => 2017-05-16 19:49:40
                    [is_3D] => 0
                    [version] => 
                    [software] => 
                    [is_image] => 1
                    [numDownloads] => 0
                )

            [18] => stdClass Object
                (
                    [id] => 8894
                    [uid] => 5451
                    [nid] => 2063
                    [aid] => 0
                    [filepath] => /var/www/html/content/files/models/2063/81.png
                    [filename] => 81.png
                    [format] => PNG
                    [size] => 356009
                    [mainImage] => 0
                    [date] => 2017-05-16 20:53:16
                    [is_3D] => 0
                    [version] => 
                    [software] => 
                    [is_image] => 1
                    [numDownloads] => 0
                )

            [19] => stdClass Object
                (
                    [id] => 8883
                    [uid] => 5451
                    [nid] => 2063
                    [aid] => 0
                    [filepath] => /var/www/html/content/files/models/2063/121.png
                    [filename] => 121.png
                    [format] => PNG
                    [size] => 343242
                    [mainImage] => 0
                    [date] => 2017-05-16 20:05:24
                    [is_3D] => 0
                    [version] => 
                    [software] => 
                    [is_image] => 1
                    [numDownloads] => 0
                )

            [20] => stdClass Object
                (
                    [id] => 8882
                    [uid] => 5451
                    [nid] => 2063
                    [aid] => 0
                    [filepath] => /var/www/html/content/files/models/2063/11.png
                    [filename] => 11.png
                    [format] => PNG
                    [size] => 333365
                    [mainImage] => 0
                    [date] => 2017-05-16 20:05:20
                    [is_3D] => 0
                    [version] => 
                    [software] => 
                    [is_image] => 1
                    [numDownloads] => 0
                )

            [21] => stdClass Object
                (
                    [id] => 8865
                    [uid] => 5451
                    [nid] => 2063
                    [aid] => 0
                    [filepath] => /var/www/html/content/files/models/2063/3.png
                    [filename] => 3.png
                    [format] => PNG
                    [size] => 324606
                    [mainImage] => 0
                    [date] => 2017-05-16 19:49:46
                    [is_3D] => 0
                    [version] => 
                    [software] => 
                    [is_image] => 1
                    [numDownloads] => 0
                )

            [22] => stdClass Object
                (
                    [id] => 8893
                    [uid] => 5451
                    [nid] => 2063
                    [aid] => 0
                    [filepath] => /var/www/html/content/files/models/2063/172.png
                    [filename] => 172.png
                    [format] => PNG
                    [size] => 322058
                    [mainImage] => 0
                    [date] => 2017-05-16 20:53:13
                    [is_3D] => 0
                    [version] => 
                    [software] => 
                    [is_image] => 1
                    [numDownloads] => 0
                )

            [23] => stdClass Object
                (
                    [id] => 8880
                    [uid] => 5451
                    [nid] => 2063
                    [aid] => 0
                    [filepath] => /var/www/html/content/files/models/2063/91.png
                    [filename] => 91.png
                    [format] => PNG
                    [size] => 315521
                    [mainImage] => 0
                    [date] => 2017-05-16 20:05:11
                    [is_3D] => 0
                    [version] => 
                    [software] => 
                    [is_image] => 1
                    [numDownloads] => 0
                )

            [24] => stdClass Object
                (
                    [id] => 8885
                    [uid] => 5451
                    [nid] => 2063
                    [aid] => 0
                    [filepath] => /var/www/html/content/files/models/2063/141.png
                    [filename] => 141.png
                    [format] => PNG
                    [size] => 311915
                    [mainImage] => 0
                    [date] => 2017-05-16 20:05:31
                    [is_3D] => 0
                    [version] => 
                    [software] => 
                    [is_image] => 1
                    [numDownloads] => 0
                )

            [25] => stdClass Object
                (
                    [id] => 8866
                    [uid] => 5451
                    [nid] => 2063
                    [aid] => 0
                    [filepath] => /var/www/html/content/files/models/2063/4.png
                    [filename] => 4.png
                    [format] => PNG
                    [size] => 310457
                    [mainImage] => 0
                    [date] => 2017-05-16 19:49:52
                    [is_3D] => 0
                    [version] => 
                    [software] => 
                    [is_image] => 1
                    [numDownloads] => 0
                )

            [26] => stdClass Object
                (
                    [id] => 8884
                    [uid] => 5451
                    [nid] => 2063
                    [aid] => 0
                    [filepath] => /var/www/html/content/files/models/2063/131.png
                    [filename] => 131.png
                    [format] => PNG
                    [size] => 309620
                    [mainImage] => 0
                    [date] => 2017-05-16 20:05:27
                    [is_3D] => 0
                    [version] => 
                    [software] => 
                    [is_image] => 1
                    [numDownloads] => 0
                )

            [27] => stdClass Object
                (
                    [id] => 8879
                    [uid] => 5451
                    [nid] => 2063
                    [aid] => 0
                    [filepath] => /var/www/html/content/files/models/2063/6.png
                    [filename] => 6.png
                    [format] => PNG
                    [size] => 279610
                    [mainImage] => 0
                    [date] => 2017-05-16 20:04:58
                    [is_3D] => 0
                    [version] => 
                    [software] => 
                    [is_image] => 1
                    [numDownloads] => 0
                )

            [28] => stdClass Object
                (
                    [id] => 8868
                    [uid] => 5451
                    [nid] => 2063
                    [aid] => 0
                    [filepath] => /var/www/html/content/files/models/2063/7.png
                    [filename] => 7.png
                    [format] => PNG
                    [size] => 256596
                    [mainImage] => 0
                    [date] => 2017-05-16 19:50:07
                    [is_3D] => 0
                    [version] => 
                    [software] => 
                    [is_image] => 1
                    [numDownloads] => 0
                )

            [29] => stdClass Object
                (
                    [id] => 8887
                    [uid] => 5451
                    [nid] => 2063
                    [aid] => 0
                    [filepath] => /var/www/html/content/files/models/2063/161.png
                    [filename] => 161.png
                    [format] => PNG
                    [size] => 238499
                    [mainImage] => 0
                    [date] => 2017-05-16 20:05:40
                    [is_3D] => 0
                    [version] => 
                    [software] => 
                    [is_image] => 1
                    [numDownloads] => 0
                )

        )

    [size] => 664.87 MB
    [models] => Array
        (
            [0] => stdClass Object
                (
                    [id] => 2361
                    [title] => WJDAE - UPIC2 Soap Dispenser
                    [software] => 
                    [version] => 
                    [description] => This is my second unique version of the Umbra Soap Dispenser 



Can be mounted on the wall or secured on the counter-top 



Holds 13 fluid ounces 



Made from a combination of metal, plastic and if desirable, glass. 
                    [viewerfile] => Soap Dispenser_countertop_mounted.stp
                    [video] => 
                    [access] => 0
                    [added] => 2017-11-17 11:48:32
                    [updated] => 2017-11-17 11:48:32
                    [uid] => 5451
                    [tags] => soappump, clean, dispenser, wash, plastic, bathroom, sheet, metal, water, kitchen, bottle
                    [classification] => 14
                    [permalink] => wjdae-upic2-soap-dispenser
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 11053
                    [mainImage] => 1.3.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 11054
                                    [uid] => 5451
                                    [nid] => 2361
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2361/Soap Dispenser_wall_mounted.stp
                                    [filename] => Soap Dispenser_wall_mounted.stp
                                    [format] => STP
                                    [size] => 3630234
                                    [mainImage] => 0
                                    [date] => 2017-11-17 11:48:22
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 39
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 11053
                                    [uid] => 5451
                                    [nid] => 2361
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2361/Soap Dispenser_countertop_mounted.stp
                                    [filename] => Soap Dispenser_countertop_mounted.stp
                                    [format] => STP
                                    [size] => 3630198
                                    [mainImage] => 0
                                    [date] => 2017-11-17 11:48:21
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 39
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 11048
                                    [uid] => 5451
                                    [nid] => 2361
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2361/1.3.png
                                    [filename] => 1.3.png
                                    [format] => PNG
                                    [size] => 192691
                                    [mainImage] => 1
                                    [date] => 2017-11-17 11:44:52
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [3] => stdClass Object
                                (
                                    [id] => 11049
                                    [uid] => 5451
                                    [nid] => 2361
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2361/1.360.jpg
                                    [filename] => 1.360.jpg
                                    [format] => JPG
                                    [size] => 114029
                                    [mainImage] => 0
                                    [date] => 2017-11-17 11:45:11
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [4] => stdClass Object
                                (
                                    [id] => 11050
                                    [uid] => 5451
                                    [nid] => 2361
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2361/1.361.jpg
                                    [filename] => 1.361.jpg
                                    [format] => JPG
                                    [size] => 109653
                                    [mainImage] => 0
                                    [date] => 2017-11-17 11:45:13
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [5] => stdClass Object
                                (
                                    [id] => 11051
                                    [uid] => 5451
                                    [nid] => 2361
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2361/untitled.357.jpg
                                    [filename] => untitled.357.jpg
                                    [format] => JPG
                                    [size] => 102128
                                    [mainImage] => 0
                                    [date] => 2017-11-17 11:45:13
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 7.42 MB
                    [numDownloads] => 0
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [1] => stdClass Object
                (
                    [id] => 2357
                    [title] => WJDAE - UPIC1 Soap Dispenser
                    [software] => 
                    [version] => 
                    [description] => This is my unique version of the Umbra Soap Dispenser 



Holds 13 fluid ounces 



Can be mounted on the wall or secured on the counter-top 



Made from a combination of metal, plastic and if desirable, glass. 
                    [viewerfile] => Soap Dispenser A.stp
                    [video] => 
                    [access] => 0
                    [added] => 2017-11-16 21:43:55
                    [updated] => 2017-11-16 21:43:55
                    [uid] => 5451
                    [tags] => soappump, clean, dispenser, wash, plastic, bathroom, sheet, metal, water, kitchen, bottle
                    [classification] => 14
                    [permalink] => wjdae-upic1-soap-dispenser
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 11032
                    [mainImage] => 1.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 11032
                                    [uid] => 5451
                                    [nid] => 2357
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2357/Soap Dispenser A.stp
                                    [filename] => Soap Dispenser A.stp
                                    [format] => STP
                                    [size] => 6763503
                                    [mainImage] => 0
                                    [date] => 2017-11-16 21:43:46
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 39
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 11031
                                    [uid] => 5451
                                    [nid] => 2357
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2357/Soap Dispenser B.stp
                                    [filename] => Soap Dispenser B.stp
                                    [format] => STP
                                    [size] => 6755492
                                    [mainImage] => 0
                                    [date] => 2017-11-16 21:43:41
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 39
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 11030
                                    [uid] => 5451
                                    [nid] => 2357
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2357/1.png
                                    [filename] => 1.png
                                    [format] => PNG
                                    [size] => 243005
                                    [mainImage] => 1
                                    [date] => 2017-11-16 21:41:58
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [3] => stdClass Object
                                (
                                    [id] => 11029
                                    [uid] => 5451
                                    [nid] => 2357
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2357/1.2.png
                                    [filename] => 1.2.png
                                    [format] => PNG
                                    [size] => 200623
                                    [mainImage] => 0
                                    [date] => 2017-11-16 21:41:55
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 13.32 MB
                    [numDownloads] => 0
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [2] => stdClass Object
                (
                    [id] => 2354
                    [title] => WJDAE - TPDC1 Throttle Pedal
                    [software] => 
                    [version] => 
                    [description] => This pedal assembly is comprised of sheet metal, extruded metal wireframe and injection mounted parts. 



The sensor housing consists of a 40 degree limit stop as well as a tensioning spring to maintain accuracy of the sensor. This design is within the traditional method of a throttle pedal assembly. 



This assembly can be easily customized with different pedals, spring stiffness and travel to suit each vehicle type or customer. It is very accessible and is easy to mount and unmount to the vehicle's floor. 
                    [viewerfile] => Throttle Pedal 1.stp
                    [video] => 
                    [access] => 0
                    [added] => 2017-11-15 20:10:02
                    [updated] => 2017-11-15 20:10:02
                    [uid] => 5451
                    [tags] => throttlepedaldesign, rubber, auto, vehicle, plastic, floor, screws, design, sheet, metal, wire, car
                    [classification] => 2
                    [permalink] => wjdae-tpdc1-throttle-pedal
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 10948
                    [mainImage] => 1.4.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 10948
                                    [uid] => 5451
                                    [nid] => 2354
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2354/Throttle Pedal 1.stp
                                    [filename] => Throttle Pedal 1.stp
                                    [format] => STP
                                    [size] => 4083385
                                    [mainImage] => 0
                                    [date] => 2017-11-15 20:09:08
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 39
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 10946
                                    [uid] => 5451
                                    [nid] => 2354
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2354/1.4.png
                                    [filename] => 1.4.png
                                    [format] => PNG
                                    [size] => 196015
                                    [mainImage] => 1
                                    [date] => 2017-11-15 20:07:08
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 10943
                                    [uid] => 5451
                                    [nid] => 2354
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2354/untitled.339.jpg
                                    [filename] => untitled.339.jpg
                                    [format] => JPG
                                    [size] => 144109
                                    [mainImage] => 0
                                    [date] => 2017-11-15 20:06:58
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [3] => stdClass Object
                                (
                                    [id] => 10941
                                    [uid] => 5451
                                    [nid] => 2354
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2354/qwerty.342.jpg
                                    [filename] => qwerty.342.jpg
                                    [format] => JPG
                                    [size] => 117803
                                    [mainImage] => 0
                                    [date] => 2017-11-15 20:06:50
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [4] => stdClass Object
                                (
                                    [id] => 10945
                                    [uid] => 5451
                                    [nid] => 2354
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2354/qwerty.345.jpg
                                    [filename] => qwerty.345.jpg
                                    [format] => JPG
                                    [size] => 112786
                                    [mainImage] => 0
                                    [date] => 2017-11-15 20:07:06
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [5] => stdClass Object
                                (
                                    [id] => 10942
                                    [uid] => 5451
                                    [nid] => 2354
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2354/untitled.338.jpg
                                    [filename] => untitled.338.jpg
                                    [format] => JPG
                                    [size] => 111431
                                    [mainImage] => 0
                                    [date] => 2017-11-15 20:06:57
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [6] => stdClass Object
                                (
                                    [id] => 10944
                                    [uid] => 5451
                                    [nid] => 2354
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2354/untitled.336.jpg
                                    [filename] => untitled.336.jpg
                                    [format] => JPG
                                    [size] => 100015
                                    [mainImage] => 0
                                    [date] => 2017-11-15 20:07:03
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [7] => stdClass Object
                                (
                                    [id] => 10947
                                    [uid] => 5451
                                    [nid] => 2354
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2354/untitled.340.jpg
                                    [filename] => untitled.340.jpg
                                    [format] => JPG
                                    [size] => 96113
                                    [mainImage] => 0
                                    [date] => 2017-11-15 20:07:09
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 4.73 MB
                    [numDownloads] => 0
                    [numLikes] => 1
                    [numComments] => 0
                    [winner] => 
                )

            [3] => stdClass Object
                (
                    [id] => 2353
                    [title] => The Cause Bottle - Model E
                    [software] => 
                    [version] => 
                    [description] => Helping to Spreading Environmental Education & Awareness 



The idea behind this bottle is to recycle your bottles and spread the message of environment issues and awareness. 

To convince the user with the reusability of bottles, I chose to use a rechargable battery. One simply does not throw away a rechargable battery, one reuses it. 



The inspiration here comes from the energy a battery cell provides to produce work. In this case, it is a rechargeable battery that can be recharged many times, saving 



the environment and more convenient for the user. This design should be more than enough incentive to keep the bottle. 



This particular one represents a 9V cell. 



Description of the bottle 



Made to actual scale of the given batteries' dimensions 

The body of the bottle is stainless 18/8 stainless steel 

Wall thickness 1 mm hydroformed 

Seals are made from neoprene rubber 

Plastic parts from food grade plastics 

This is a cold drink bottle that can be opened and closed with a single hand and is comfortable to use 



It is possible to drink from the bottle as follows: 

1. As a regular bottle turning it upside-down from the drnking nipple 

2. Directly from the bottle mouth 

3. From the built-in straw spout 



Scale 4.1:1 

Capacity 700ml 

Length 69.30mm 

Width 106.60mm 

Height 183.30mm
                    [viewerfile] => Model E.STEP
                    [video] => 
                    [access] => 0
                    [added] => 2017-11-09 17:43:17
                    [updated] => 2017-11-09 17:45:44
                    [uid] => 5451
                    [tags] => 18-8, recycle, education, environment, battery, plastic, nature, stainless, bottle, steel, causebottle
                    [classification] => 35
                    [permalink] => the-cause-bottle-model-e
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 10940
                    [mainImage] => main pic.jpg
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 10940
                                    [uid] => 5451
                                    [nid] => 2353
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2353/Model E.STEP
                                    [filename] => Model E.STEP
                                    [format] => STEP
                                    [size] => 12421678
                                    [mainImage] => 0
                                    [date] => 2017-11-09 17:42:32
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 38
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 10935
                                    [uid] => 5451
                                    [nid] => 2353
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2353/21.jpg
                                    [filename] => 21.jpg
                                    [format] => JPG
                                    [size] => 295200
                                    [mainImage] => 0
                                    [date] => 2017-11-09 17:40:23
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 10939
                                    [uid] => 5451
                                    [nid] => 2353
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2353/main pic.jpg
                                    [filename] => main pic.jpg
                                    [format] => JPG
                                    [size] => 287534
                                    [mainImage] => 1
                                    [date] => 2017-11-09 17:41:01
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [3] => stdClass Object
                                (
                                    [id] => 10936
                                    [uid] => 5451
                                    [nid] => 2353
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2353/3.jpg
                                    [filename] => 3.jpg
                                    [format] => JPG
                                    [size] => 245695
                                    [mainImage] => 0
                                    [date] => 2017-11-09 17:40:47
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [4] => stdClass Object
                                (
                                    [id] => 10933
                                    [uid] => 5451
                                    [nid] => 2353
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2353/2.jpg
                                    [filename] => 2.jpg
                                    [format] => JPG
                                    [size] => 224546
                                    [mainImage] => 0
                                    [date] => 2017-11-09 17:40:05
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [5] => stdClass Object
                                (
                                    [id] => 10934
                                    [uid] => 5451
                                    [nid] => 2353
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2353/main.JPG
                                    [filename] => main.JPG
                                    [format] => JPG
                                    [size] => 203144
                                    [mainImage] => 0
                                    [date] => 2017-11-09 17:40:06
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [6] => stdClass Object
                                (
                                    [id] => 10938
                                    [uid] => 5451
                                    [nid] => 2353
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2353/5.jpg
                                    [filename] => 5.jpg
                                    [format] => JPG
                                    [size] => 191121
                                    [mainImage] => 0
                                    [date] => 2017-11-09 17:40:55
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [7] => stdClass Object
                                (
                                    [id] => 10937
                                    [uid] => 5451
                                    [nid] => 2353
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2353/4.jpg
                                    [filename] => 4.jpg
                                    [format] => JPG
                                    [size] => 155280
                                    [mainImage] => 0
                                    [date] => 2017-11-09 17:40:47
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 13.37 MB
                    [numDownloads] => 0
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [4] => stdClass Object
                (
                    [id] => 2344
                    [title] => WJDAE - TSCE2 Packaging Tray
                    [software] => 
                    [version] => 
                    [description] => A simple honeycomb tray that holds 22 pieces. 

9 filled trays and 1 blank acting as lid per box, a total of 198 pieces or 10 trays and 1 blank acting as lid per box, a total of 220 pieces. 
                    [viewerfile] => WJDAE_TSCE2_single_full.stp
                    [video] => 
                    [access] => 0
                    [added] => 2017-11-06 10:37:54
                    [updated] => 2017-11-06 10:37:54
                    [uid] => 5451
                    [tags] => reused, sustainapack, sustainability, scrap, honeycomb, recycling, packaging, plastic
                    [classification] => 34
                    [permalink] => wjdae-tsce2-packaging-tray
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 10896
                    [mainImage] => 1.6.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 10896
                                    [uid] => 5451
                                    [nid] => 2344
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2344/WJDAE_TSCE2_single_full.stp
                                    [filename] => WJDAE_TSCE2_single_full.stp
                                    [format] => STP
                                    [size] => 16892440
                                    [mainImage] => 0
                                    [date] => 2017-11-06 10:37:44
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 39
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 10895
                                    [uid] => 5451
                                    [nid] => 2344
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2344/untitled.201.png
                                    [filename] => untitled.201.png
                                    [format] => PNG
                                    [size] => 638691
                                    [mainImage] => 0
                                    [date] => 2017-11-06 10:35:39
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 10893
                                    [uid] => 5451
                                    [nid] => 2344
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2344/untitled.200.png
                                    [filename] => untitled.200.png
                                    [format] => PNG
                                    [size] => 515315
                                    [mainImage] => 0
                                    [date] => 2017-11-06 10:35:17
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [3] => stdClass Object
                                (
                                    [id] => 10888
                                    [uid] => 5451
                                    [nid] => 2344
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2344/untitled.199.jpg
                                    [filename] => untitled.199.jpg
                                    [format] => JPG
                                    [size] => 235254
                                    [mainImage] => 0
                                    [date] => 2017-11-06 10:35:02
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [4] => stdClass Object
                                (
                                    [id] => 10894
                                    [uid] => 5451
                                    [nid] => 2344
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2344/1.6.png
                                    [filename] => 1.6.png
                                    [format] => PNG
                                    [size] => 216193
                                    [mainImage] => 1
                                    [date] => 2017-11-06 10:35:32
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [5] => stdClass Object
                                (
                                    [id] => 10891
                                    [uid] => 5451
                                    [nid] => 2344
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2344/untitled.207.jpg
                                    [filename] => untitled.207.jpg
                                    [format] => JPG
                                    [size] => 201896
                                    [mainImage] => 0
                                    [date] => 2017-11-06 10:35:15
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [6] => stdClass Object
                                (
                                    [id] => 10892
                                    [uid] => 5451
                                    [nid] => 2344
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2344/untitled.203.jpg
                                    [filename] => untitled.203.jpg
                                    [format] => JPG
                                    [size] => 186909
                                    [mainImage] => 0
                                    [date] => 2017-11-06 10:35:15
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [7] => stdClass Object
                                (
                                    [id] => 10889
                                    [uid] => 5451
                                    [nid] => 2344
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2344/untitled.205.jpg
                                    [filename] => untitled.205.jpg
                                    [format] => JPG
                                    [size] => 170470
                                    [mainImage] => 0
                                    [date] => 2017-11-06 10:35:06
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [8] => stdClass Object
                                (
                                    [id] => 10890
                                    [uid] => 5451
                                    [nid] => 2344
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2344/untitled.204.jpg
                                    [filename] => untitled.204.jpg
                                    [format] => JPG
                                    [size] => 125502
                                    [mainImage] => 0
                                    [date] => 2017-11-06 10:35:08
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 18.29 MB
                    [numDownloads] => 0
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [5] => stdClass Object
                (
                    [id] => 2343
                    [title] => WJDAE - TSCE1 Packaging Tray
                    [software] => 
                    [version] => 
                    [description] => A simple tray that holds 25 pieces. 8 trays per box, a total of 200 pieces. 
                    [viewerfile] => WJDAE_TSCE1_single_tray.STEP
                    [video] => 
                    [access] => 0
                    [added] => 2017-11-04 16:25:36
                    [updated] => 2017-11-04 16:25:36
                    [uid] => 5451
                    [tags] => reused, sustainapack, sustainability, scrap, recycling, packaging, plastic
                    [classification] => 34
                    [permalink] => wjdae-tsce1-packaging-tray
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 10885
                    [mainImage] => 1.5.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 10885
                                    [uid] => 5451
                                    [nid] => 2343
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2343/WJDAE_TSCE1_single_tray.STEP
                                    [filename] => WJDAE_TSCE1_single_tray.STEP
                                    [format] => STEP
                                    [size] => 45558228
                                    [mainImage] => 0
                                    [date] => 2017-11-04 16:25:07
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 38
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 10875
                                    [uid] => 5451
                                    [nid] => 2343
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2343/1.jpg
                                    [filename] => 1.jpg
                                    [format] => JPG
                                    [size] => 543870
                                    [mainImage] => 0
                                    [date] => 2017-11-04 16:11:04
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 10882
                                    [uid] => 5451
                                    [nid] => 2343
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2343/11.jpg
                                    [filename] => 11.jpg
                                    [format] => JPG
                                    [size] => 543870
                                    [mainImage] => 0
                                    [date] => 2017-11-04 16:19:42
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [3] => stdClass Object
                                (
                                    [id] => 10884
                                    [uid] => 5451
                                    [nid] => 2343
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2343/untitled.189.png
                                    [filename] => untitled.189.png
                                    [format] => PNG
                                    [size] => 440303
                                    [mainImage] => 0
                                    [date] => 2017-11-04 16:19:48
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [4] => stdClass Object
                                (
                                    [id] => 10879
                                    [uid] => 5451
                                    [nid] => 2343
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2343/box.196.jpg
                                    [filename] => box.196.jpg
                                    [format] => JPG
                                    [size] => 289858
                                    [mainImage] => 0
                                    [date] => 2017-11-04 16:19:33
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [5] => stdClass Object
                                (
                                    [id] => 10877
                                    [uid] => 5451
                                    [nid] => 2343
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2343/1.5.png
                                    [filename] => 1.5.png
                                    [format] => PNG
                                    [size] => 272077
                                    [mainImage] => 1
                                    [date] => 2017-11-04 16:12:56
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [6] => stdClass Object
                                (
                                    [id] => 10880
                                    [uid] => 5451
                                    [nid] => 2343
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2343/box.197.jpg
                                    [filename] => box.197.jpg
                                    [format] => JPG
                                    [size] => 218847
                                    [mainImage] => 0
                                    [date] => 2017-11-04 16:19:37
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [7] => stdClass Object
                                (
                                    [id] => 10874
                                    [uid] => 5451
                                    [nid] => 2343
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2343/box.194.jpg
                                    [filename] => box.194.jpg
                                    [format] => JPG
                                    [size] => 212149
                                    [mainImage] => 0
                                    [date] => 2017-11-04 16:11:00
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [8] => stdClass Object
                                (
                                    [id] => 10883
                                    [uid] => 5451
                                    [nid] => 2343
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2343/untitled.191.jpg
                                    [filename] => untitled.191.jpg
                                    [format] => JPG
                                    [size] => 171665
                                    [mainImage] => 0
                                    [date] => 2017-11-04 16:19:45
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [9] => stdClass Object
                                (
                                    [id] => 10881
                                    [uid] => 5451
                                    [nid] => 2343
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2343/untitled.190.jpg
                                    [filename] => untitled.190.jpg
                                    [format] => JPG
                                    [size] => 152988
                                    [mainImage] => 0
                                    [date] => 2017-11-04 16:19:37
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 46.16 MB
                    [numDownloads] => 1
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [6] => stdClass Object
                (
                    [id] => 2342
                    [title] => WJ-3DP Pump Assembly
                    [software] => 
                    [version] => 
                    [description] => The is a vertical sprinkler that is staked into the soil and is fed by a flexible tubing to supply water and nutrients to your plants. 
The is a flow valve that is used to control the flow of fluid from a container. It is connected to a flexible tubing to supply water and nutrients to your plants. It can be fitted to any consumer drink or water bottle. The is a pressure relief valve used to release pressure from a pressurized container. The is a hand pump designed to pressurize any plastic water or drink container that can hold a pressure. 
                    [viewerfile] => WJ-3DP Pump Assembly.igs
                    [video] => 
                    [access] => 0
                    [added] => 2017-11-04 16:06:23
                    [updated] => 2017-11-04 16:06:23
                    [uid] => 5451
                    [tags] => hydro, sprinkler, printing, spray, plants, 3d, water, bottle
                    [classification] => 28
                    [permalink] => wj-3dp-pump-assembly
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 10871
                    [mainImage] => 1.7.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 10870
                                    [uid] => 5451
                                    [nid] => 2342
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2342/WJ-3DP Pump Assembly.0040.ipt
                                    [filename] => WJ-3DP Pump Assembly.0040.ipt
                                    [format] => IPT
                                    [size] => 32259584
                                    [mainImage] => 0
                                    [date] => 2017-11-04 15:56:15
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 14
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 10871
                                    [uid] => 5451
                                    [nid] => 2342
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2342/WJ-3DP Pump Assembly.igs
                                    [filename] => WJ-3DP Pump Assembly.igs
                                    [format] => IGS
                                    [size] => 30134180
                                    [mainImage] => 0
                                    [date] => 2017-11-04 16:01:31
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 17
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 10872
                                    [uid] => 5451
                                    [nid] => 2342
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2342/WJ-3DP Pump Assembly_sectioned.igs
                                    [filename] => WJ-3DP Pump Assembly_sectioned.igs
                                    [format] => IGS
                                    [size] => 27669916
                                    [mainImage] => 0
                                    [date] => 2017-11-04 16:03:52
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 17
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [3] => stdClass Object
                                (
                                    [id] => 10873
                                    [uid] => 5451
                                    [nid] => 2342
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2342/WJ-3DP Pump Assembly.dwg
                                    [filename] => WJ-3DP Pump Assembly.dwg
                                    [format] => DWG
                                    [size] => 21567359
                                    [mainImage] => 0
                                    [date] => 2017-11-04 16:06:07
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 84
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [4] => stdClass Object
                                (
                                    [id] => 10858
                                    [uid] => 5451
                                    [nid] => 2342
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2342/hand pump.248.jpg
                                    [filename] => hand pump.248.jpg
                                    [format] => JPG
                                    [size] => 364549
                                    [mainImage] => 0
                                    [date] => 2017-11-04 15:41:49
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [5] => stdClass Object
                                (
                                    [id] => 10866
                                    [uid] => 5451
                                    [nid] => 2342
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2342/hand pump.247.jpg
                                    [filename] => hand pump.247.jpg
                                    [format] => JPG
                                    [size] => 340380
                                    [mainImage] => 0
                                    [date] => 2017-11-04 15:43:09
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [6] => stdClass Object
                                (
                                    [id] => 10863
                                    [uid] => 5451
                                    [nid] => 2342
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2342/hand pump.250.jpg
                                    [filename] => hand pump.250.jpg
                                    [format] => JPG
                                    [size] => 329019
                                    [mainImage] => 0
                                    [date] => 2017-11-04 15:42:25
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [7] => stdClass Object
                                (
                                    [id] => 10864
                                    [uid] => 5451
                                    [nid] => 2342
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2342/hand pump.246.jpg
                                    [filename] => hand pump.246.jpg
                                    [format] => JPG
                                    [size] => 281407
                                    [mainImage] => 0
                                    [date] => 2017-11-04 15:42:28
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [8] => stdClass Object
                                (
                                    [id] => 10861
                                    [uid] => 5451
                                    [nid] => 2342
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2342/hand pump.254.jpg
                                    [filename] => hand pump.254.jpg
                                    [format] => JPG
                                    [size] => 233574
                                    [mainImage] => 0
                                    [date] => 2017-11-04 15:42:14
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [9] => stdClass Object
                                (
                                    [id] => 10855
                                    [uid] => 5451
                                    [nid] => 2342
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2342/1.7.png
                                    [filename] => 1.7.png
                                    [format] => PNG
                                    [size] => 137826
                                    [mainImage] => 1
                                    [date] => 2017-11-04 15:39:28
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [10] => stdClass Object
                                (
                                    [id] => 10865
                                    [uid] => 5451
                                    [nid] => 2342
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2342/hand pump.260.jpg
                                    [filename] => hand pump.260.jpg
                                    [format] => JPG
                                    [size] => 100425
                                    [mainImage] => 0
                                    [date] => 2017-11-04 15:42:31
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [11] => stdClass Object
                                (
                                    [id] => 10862
                                    [uid] => 5451
                                    [nid] => 2342
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2342/hand pump.257.jpg
                                    [filename] => hand pump.257.jpg
                                    [format] => JPG
                                    [size] => 93731
                                    [mainImage] => 0
                                    [date] => 2017-11-04 15:42:22
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [12] => stdClass Object
                                (
                                    [id] => 10859
                                    [uid] => 5451
                                    [nid] => 2342
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2342/hand pump.259.jpg
                                    [filename] => hand pump.259.jpg
                                    [format] => JPG
                                    [size] => 91803
                                    [mainImage] => 0
                                    [date] => 2017-11-04 15:41:57
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [13] => stdClass Object
                                (
                                    [id] => 10860
                                    [uid] => 5451
                                    [nid] => 2342
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2342/hand pump.256.jpg
                                    [filename] => hand pump.256.jpg
                                    [format] => JPG
                                    [size] => 85048
                                    [mainImage] => 0
                                    [date] => 2017-11-04 15:42:02
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 108.42 MB
                    [numDownloads] => 1
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [7] => stdClass Object
                (
                    [id] => 2331
                    [title] => WJDAE - STLC1 Sensing Unit
                    [software] => 
                    [version] => 
                    [description] => This is my version of the liquid level sensing unit. 
                    [viewerfile] => Float Sensing Unit.STEP.stp
                    [video] => 
                    [access] => 0
                    [added] => 2017-09-26 17:42:26
                    [updated] => 2017-09-26 17:42:26
                    [uid] => 5451
                    [tags] => senselevel, sense, meter, level, sensor, machining, molding, fuel, gas, automotive, fluid, oil, injection, plastic, gage, gauge, liquid, truck, metal, water, car, tube
                    [classification] => 2
                    [permalink] => wjdae-stlc1-sensing-unit
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 10756
                    [mainImage] => qwerty.9.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 10756
                                    [uid] => 5451
                                    [nid] => 2331
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2331/Float Sensing Unit.STEP.stp
                                    [filename] => Float Sensing Unit.STEP.stp
                                    [format] => STP
                                    [size] => 3161238
                                    [mainImage] => 0
                                    [date] => 2017-09-26 17:41:44
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 39
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 10753
                                    [uid] => 5451
                                    [nid] => 2331
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2331/5.png
                                    [filename] => 5.png
                                    [format] => PNG
                                    [size] => 548168
                                    [mainImage] => 0
                                    [date] => 2017-09-26 17:41:09
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 10754
                                    [uid] => 5451
                                    [nid] => 2331
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2331/3.png
                                    [filename] => 3.png
                                    [format] => PNG
                                    [size] => 465341
                                    [mainImage] => 0
                                    [date] => 2017-09-26 17:41:24
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [3] => stdClass Object
                                (
                                    [id] => 10755
                                    [uid] => 5451
                                    [nid] => 2331
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2331/4.png
                                    [filename] => 4.png
                                    [format] => PNG
                                    [size] => 442304
                                    [mainImage] => 0
                                    [date] => 2017-09-26 17:41:27
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [4] => stdClass Object
                                (
                                    [id] => 10751
                                    [uid] => 5451
                                    [nid] => 2331
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2331/2.png
                                    [filename] => 2.png
                                    [format] => PNG
                                    [size] => 437726
                                    [mainImage] => 0
                                    [date] => 2017-09-26 17:41:04
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [5] => stdClass Object
                                (
                                    [id] => 10752
                                    [uid] => 5451
                                    [nid] => 2331
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2331/1.png
                                    [filename] => 1.png
                                    [format] => PNG
                                    [size] => 419689
                                    [mainImage] => 0
                                    [date] => 2017-09-26 17:41:04
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [6] => stdClass Object
                                (
                                    [id] => 10750
                                    [uid] => 5451
                                    [nid] => 2331
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2331/qwerty.9.png
                                    [filename] => qwerty.9.png
                                    [format] => PNG
                                    [size] => 292096
                                    [mainImage] => 1
                                    [date] => 2017-09-26 17:40:33
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 5.5 MB
                    [numDownloads] => 1
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [8] => stdClass Object
                (
                    [id] => 2330
                    [title] => Quit Smoking Token/Pendant
                    [software] => 
                    [version] => 
                    [description] => The idea here is to carry this token/pendant with you at all times to remind yourself of the promise you made. 
                    [viewerfile] => quit smoking pendant.STEP
                    [video] => 
                    [access] => 0
                    [added] => 2017-09-26 17:39:50
                    [updated] => 2017-09-26 17:39:50
                    [uid] => 5451
                    [tags] => quit, unmakeable, token, cigar, smoking, cigarette, pendant, print, 3d
                    [classification] => 22
                    [permalink] => quit-smoking-token-pendant
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 10749
                    [mainImage] => untitled.18.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 10749
                                    [uid] => 5451
                                    [nid] => 2330
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2330/quit smoking pendant.STEP
                                    [filename] => quit smoking pendant.STEP
                                    [format] => STEP
                                    [size] => 2095710
                                    [mainImage] => 0
                                    [date] => 2017-09-26 17:39:01
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 38
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 10746
                                    [uid] => 5451
                                    [nid] => 2330
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2330/untitled.18.png
                                    [filename] => untitled.18.png
                                    [format] => PNG
                                    [size] => 290852
                                    [mainImage] => 1
                                    [date] => 2017-09-26 17:38:30
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 10748
                                    [uid] => 5451
                                    [nid] => 2330
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2330/2.jpg
                                    [filename] => 2.jpg
                                    [format] => JPG
                                    [size] => 176762
                                    [mainImage] => 0
                                    [date] => 2017-09-26 17:38:49
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [3] => stdClass Object
                                (
                                    [id] => 10747
                                    [uid] => 5451
                                    [nid] => 2330
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2330/1.jpg
                                    [filename] => 1.jpg
                                    [format] => JPG
                                    [size] => 164366
                                    [mainImage] => 0
                                    [date] => 2017-09-26 17:38:39
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 2.6 MB
                    [numDownloads] => 1
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [9] => stdClass Object
                (
                    [id] => 2329
                    [title] => Pencil Sharpener
                    [software] => 
                    [version] => 
                    [description] => A detailed model of a metal pencil sharpener.
                    [viewerfile] => Pencil sharpener assem.IGS
                    [video] => 
                    [access] => 0
                    [added] => 2017-09-26 17:37:52
                    [updated] => 2017-09-26 17:37:52
                    [uid] => 5451
                    [tags] => blade, pencil, metal, sharpener, stationary
                    [classification] => 11
                    [permalink] => pencil-sharpener
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 10745
                    [mainImage] => pic 1.JPG
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 10745
                                    [uid] => 5451
                                    [nid] => 2329
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2329/Pencil sharpener assem.IGS
                                    [filename] => Pencil sharpener assem.IGS
                                    [format] => IGS
                                    [size] => 1446562
                                    [mainImage] => 0
                                    [date] => 2017-09-26 17:36:57
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 17
                                    [is_image] => 
                                    [numDownloads] => 1
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 10741
                                    [uid] => 5451
                                    [nid] => 2329
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2329/pic 1.JPG
                                    [filename] => pic 1.JPG
                                    [format] => JPG
                                    [size] => 31793
                                    [mainImage] => 1
                                    [date] => 2017-09-26 17:36:31
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 1
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 10742
                                    [uid] => 5451
                                    [nid] => 2329
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2329/pic 3.JPG
                                    [filename] => pic 3.JPG
                                    [format] => JPG
                                    [size] => 27984
                                    [mainImage] => 0
                                    [date] => 2017-09-26 17:36:32
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [3] => stdClass Object
                                (
                                    [id] => 10743
                                    [uid] => 5451
                                    [nid] => 2329
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2329/pic 2.JPG
                                    [filename] => pic 2.JPG
                                    [format] => JPG
                                    [size] => 20616
                                    [mainImage] => 0
                                    [date] => 2017-09-26 17:36:32
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 1.46 MB
                    [numDownloads] => 5
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [10] => stdClass Object
                (
                    [id] => 2328
                    [title] => WJDAE - OVSC4 Click
                    [software] => 
                    [version] => 
                    [description] => This is another version of my simple oxygen splitter that is easy to print and modify. It is a single piece with no extra moving parts. 

                    [viewerfile] => Oxy Split 6.stp
                    [video] => 
                    [access] => 0
                    [added] => 2017-09-26 17:35:49
                    [updated] => 2017-09-26 17:35:49
                    [uid] => 5451
                    [tags] => oxygenvalvesplitter, patient, oxygen, printing, medical, plastic, 3d, cylinder
                    [classification] => 22
                    [permalink] => wjdae-ovsc4-click
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 10740
                    [mainImage] => 1.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 10740
                                    [uid] => 5451
                                    [nid] => 2328
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2328/Oxy Split 6.stp
                                    [filename] => Oxy Split 6.stp
                                    [format] => STP
                                    [size] => 1463126
                                    [mainImage] => 0
                                    [date] => 2017-09-26 17:35:19
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 39
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 10739
                                    [uid] => 5451
                                    [nid] => 2328
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2328/1.png
                                    [filename] => 1.png
                                    [format] => PNG
                                    [size] => 533936
                                    [mainImage] => 1
                                    [date] => 2017-09-26 17:35:08
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 10738
                                    [uid] => 5451
                                    [nid] => 2328
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2328/2.png
                                    [filename] => 2.png
                                    [format] => PNG
                                    [size] => 369182
                                    [mainImage] => 0
                                    [date] => 2017-09-26 17:35:08
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 2.26 MB
                    [numDownloads] => 1
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [11] => stdClass Object
                (
                    [id] => 2327
                    [title] => WJDAE - OVSC3 Raker
                    [software] => 
                    [version] => 
                    [description] => This is another version of my simple oxygen splitter that is easy to print and modify. It is a single piece with no moving parts. 
                    [viewerfile] => Oxy Split 5.stp
                    [video] => 
                    [access] => 0
                    [added] => 2017-09-26 17:34:11
                    [updated] => 2017-09-26 17:34:11
                    [uid] => 5451
                    [tags] => oxygenvalvesplitter, patient, oxygen, printing, medical, plastic, 3d, cylinder
                    [classification] => 22
                    [permalink] => wjdae-ovsc3-raker
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 10737
                    [mainImage] => 1.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 10737
                                    [uid] => 5451
                                    [nid] => 2327
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2327/Oxy Split 5.stp
                                    [filename] => Oxy Split 5.stp
                                    [format] => STP
                                    [size] => 821429
                                    [mainImage] => 0
                                    [date] => 2017-09-26 17:33:35
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 39
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 10736
                                    [uid] => 5451
                                    [nid] => 2327
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2327/2.png
                                    [filename] => 2.png
                                    [format] => PNG
                                    [size] => 435050
                                    [mainImage] => 0
                                    [date] => 2017-09-26 17:33:28
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 10735
                                    [uid] => 5451
                                    [nid] => 2327
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2327/1.png
                                    [filename] => 1.png
                                    [format] => PNG
                                    [size] => 421617
                                    [mainImage] => 1
                                    [date] => 2017-09-26 17:33:26
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 1.6 MB
                    [numDownloads] => 1
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [12] => stdClass Object
                (
                    [id] => 2326
                    [title] => WJDAE - OVSC2 Tri Fighter
                    [software] => 
                    [version] => 
                    [description] => The inside diameter of the ports has been modified to accept 7mm tubes. It can easily be changed to any desired diameter without any issues. The restrictive slots were also changed to suit the new diameter. 
                    [viewerfile] => Oxy Split 4_rev1.stp
                    [video] => 
                    [access] => 0
                    [added] => 2017-09-26 17:32:41
                    [updated] => 2017-09-26 17:32:41
                    [uid] => 5451
                    [tags] => oxygenvalvesplitter, patient, oxygen, printing, medical, plastic, 3d, cylinder
                    [classification] => 22
                    [permalink] => wjdae-ovsc2-tri-fighter-2
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 10734
                    [mainImage] => 1.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 10734
                                    [uid] => 5451
                                    [nid] => 2326
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2326/Oxy Split 4_rev1.stp
                                    [filename] => Oxy Split 4_rev1.stp
                                    [format] => STP
                                    [size] => 1081065
                                    [mainImage] => 0
                                    [date] => 2017-09-26 17:29:11
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 39
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 10731
                                    [uid] => 5451
                                    [nid] => 2326
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2326/1.png
                                    [filename] => 1.png
                                    [format] => PNG
                                    [size] => 344891
                                    [mainImage] => 1
                                    [date] => 2017-09-26 17:29:00
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 10733
                                    [uid] => 5451
                                    [nid] => 2326
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2326/2.png
                                    [filename] => 2.png
                                    [format] => PNG
                                    [size] => 339969
                                    [mainImage] => 0
                                    [date] => 2017-09-26 17:29:05
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [3] => stdClass Object
                                (
                                    [id] => 10732
                                    [uid] => 5451
                                    [nid] => 2326
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2326/3.png
                                    [filename] => 3.png
                                    [format] => PNG
                                    [size] => 301892
                                    [mainImage] => 0
                                    [date] => 2017-09-26 17:29:04
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 1.97 MB
                    [numDownloads] => 1
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [13] => stdClass Object
                (
                    [id] => 2324
                    [title] => WJDAE - OVSC1 Oxy Split 3
                    [software] => 
                    [version] => 
                    [description] => This is another version of my simple oxygen splitter that is easy to print and modify. 

                    [viewerfile] => Oxy Split 3_rev1.stp
                    [video] => 
                    [access] => 0
                    [added] => 2017-09-26 17:27:05
                    [updated] => 2017-09-26 17:27:05
                    [uid] => 5451
                    [tags] => oxygenvalvesplitter, patient, oxygen, printing, medical, plastic, 3d, cylinder
                    [classification] => 22
                    [permalink] => wjdae-ovsc1-oxy-split-3
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 10730
                    [mainImage] => 1.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 10729
                                    [uid] => 5451
                                    [nid] => 2324
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2324/3.png
                                    [filename] => 3.png
                                    [format] => PNG
                                    [size] => 491571
                                    [mainImage] => 0
                                    [date] => 2017-09-26 17:26:15
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 10728
                                    [uid] => 5451
                                    [nid] => 2324
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2324/2.png
                                    [filename] => 2.png
                                    [format] => PNG
                                    [size] => 379307
                                    [mainImage] => 0
                                    [date] => 2017-09-26 17:26:13
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 10727
                                    [uid] => 5451
                                    [nid] => 2324
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2324/1.png
                                    [filename] => 1.png
                                    [format] => PNG
                                    [size] => 370066
                                    [mainImage] => 1
                                    [date] => 2017-09-26 17:26:11
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [3] => stdClass Object
                                (
                                    [id] => 10730
                                    [uid] => 5451
                                    [nid] => 2324
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2324/Oxy Split 3_rev1.stp
                                    [filename] => Oxy Split 3_rev1.stp
                                    [format] => STP
                                    [size] => 273867
                                    [mainImage] => 0
                                    [date] => 2017-09-26 17:26:17
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 39
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 1.44 MB
                    [numDownloads] => 1
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [14] => stdClass Object
                (
                    [id] => 2323
                    [title] => WJDAE - OVSC1 Oxy Split 2
                    [software] => 
                    [version] => 
                    [description] => This is the revised version of my simple oxygen splitter that is easy to print and modify. 



This one can fit within the specified 150mm x 150mm. 
                    [viewerfile] => Oxy Split 2_rev1.stp
                    [video] => 
                    [access] => 0
                    [added] => 2017-09-26 17:25:13
                    [updated] => 2017-09-26 17:25:13
                    [uid] => 5451
                    [tags] => oxygenvalvesplitter, patient, oxygen, printing, medical, plastic, 3d, cylinder
                    [classification] => 22
                    [permalink] => wjdae-ovsc1-oxy-split-2
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 10726
                    [mainImage] => 1.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 10723
                                    [uid] => 5451
                                    [nid] => 2323
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2323/1.png
                                    [filename] => 1.png
                                    [format] => PNG
                                    [size] => 459964
                                    [mainImage] => 1
                                    [date] => 2017-09-26 17:23:42
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 10724
                                    [uid] => 5451
                                    [nid] => 2323
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2323/3.png
                                    [filename] => 3.png
                                    [format] => PNG
                                    [size] => 449644
                                    [mainImage] => 0
                                    [date] => 2017-09-26 17:23:52
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 10725
                                    [uid] => 5451
                                    [nid] => 2323
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2323/2.png
                                    [filename] => 2.png
                                    [format] => PNG
                                    [size] => 417410
                                    [mainImage] => 0
                                    [date] => 2017-09-26 17:23:54
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [3] => stdClass Object
                                (
                                    [id] => 10726
                                    [uid] => 5451
                                    [nid] => 2323
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2323/Oxy Split 2_rev1.stp
                                    [filename] => Oxy Split 2_rev1.stp
                                    [format] => STP
                                    [size] => 240737
                                    [mainImage] => 0
                                    [date] => 2017-09-26 17:23:55
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 39
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 1.5 MB
                    [numDownloads] => 1
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [15] => stdClass Object
                (
                    [id] => 2322
                    [title] => WJDAE - OVSC1 Oxy Split 1
                    [software] => 
                    [version] => 
                    [description] => This is a simple oxygen splitter that is easy to print and is easy to modify. 

                    [viewerfile] => Oxy Split 1_rev1.stp
                    [video] => 
                    [access] => 0
                    [added] => 2017-09-26 17:20:13
                    [updated] => 2017-09-26 17:20:13
                    [uid] => 5451
                    [tags] => patient, oxygen, printing, medical, plastic, 3d, cylinder, oxygenvalvesplitter
                    [classification] => 22
                    [permalink] => wjdae-ovsc1-oxy-split-1-2
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 10721
                    [mainImage] => 1.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 10719
                                    [uid] => 5451
                                    [nid] => 2322
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2322/1.png
                                    [filename] => 1.png
                                    [format] => PNG
                                    [size] => 451271
                                    [mainImage] => 1
                                    [date] => 2017-09-26 17:15:37
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 10720
                                    [uid] => 5451
                                    [nid] => 2322
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2322/2.png
                                    [filename] => 2.png
                                    [format] => PNG
                                    [size] => 434686
                                    [mainImage] => 0
                                    [date] => 2017-09-26 17:15:40
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 10722
                                    [uid] => 5451
                                    [nid] => 2322
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2322/3.png
                                    [filename] => 3.png
                                    [format] => PNG
                                    [size] => 397444
                                    [mainImage] => 0
                                    [date] => 2017-09-26 17:15:43
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [3] => stdClass Object
                                (
                                    [id] => 10721
                                    [uid] => 5451
                                    [nid] => 2322
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2322/Oxy Split 1_rev1.stp
                                    [filename] => Oxy Split 1_rev1.stp
                                    [format] => STP
                                    [size] => 235900
                                    [mainImage] => 0
                                    [date] => 2017-09-26 17:15:42
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 39
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 1.45 MB
                    [numDownloads] => 1
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [16] => stdClass Object
                (
                    [id] => 2320
                    [title] => Money Tree
                    [software] => 
                    [version] => 
                    [description] => This model will remind you that money doesn't grow on trees so spend wisely and save money when you can. 
                    [viewerfile] => Save Money.STEP
                    [video] => 
                    [access] => 0
                    [added] => 2017-09-26 17:08:13
                    [updated] => 2017-09-26 17:08:13
                    [uid] => 5451
                    [tags] => forest, save, print, plastic, tree, money, 3d
                    [classification] => 13
                    [permalink] => money-tree
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 10718
                    [mainImage] => a.jpg
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 10718
                                    [uid] => 5451
                                    [nid] => 2320
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2320/Save Money.STEP
                                    [filename] => Save Money.STEP
                                    [format] => STEP
                                    [size] => 23543087
                                    [mainImage] => 0
                                    [date] => 2017-09-26 16:55:04
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 38
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 10717
                                    [uid] => 5451
                                    [nid] => 2320
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2320/c.jpg
                                    [filename] => c.jpg
                                    [format] => JPG
                                    [size] => 282507
                                    [mainImage] => 0
                                    [date] => 2017-09-26 16:51:11
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 10715
                                    [uid] => 5451
                                    [nid] => 2320
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2320/a.jpg
                                    [filename] => a.jpg
                                    [format] => JPG
                                    [size] => 230986
                                    [mainImage] => 1
                                    [date] => 2017-09-26 16:50:58
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [3] => stdClass Object
                                (
                                    [id] => 10716
                                    [uid] => 5451
                                    [nid] => 2320
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2320/b.jpg
                                    [filename] => b.jpg
                                    [format] => JPG
                                    [size] => 196919
                                    [mainImage] => 0
                                    [date] => 2017-09-26 16:50:59
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 23.13 MB
                    [numDownloads] => 1
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [17] => stdClass Object
                (
                    [id] => 2278
                    [title] => Lose Weight Box
                    [software] => 
                    [version] => 
                    [description] => This model is intended to be a small box to put stuff in then in your pocket. Now that I think of it, it's great for supplements, small paper notes, e.t.c. The design should be a constant reminder of your promise to lose weight. 
                    [viewerfile] => lose weight box.STEP
                    [video] => 
                    [access] => 0
                    [added] => 2017-09-08 11:49:45
                    [updated] => 2017-09-08 11:49:45
                    [uid] => 5451
                    [tags] => lose, supplement, notes, pocket, pill, exercise, print, body, 3d, paper, weight, box
                    [classification] => 13
                    [permalink] => lose-weight-box
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 10155
                    [mainImage] => a.jpg
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 10155
                                    [uid] => 5451
                                    [nid] => 2278
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2278/lose weight box.STEP
                                    [filename] => lose weight box.STEP
                                    [format] => STEP
                                    [size] => 4540365
                                    [mainImage] => 0
                                    [date] => 2017-09-08 11:49:26
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 38
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 10152
                                    [uid] => 5451
                                    [nid] => 2278
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2278/Lid.STEP
                                    [filename] => Lid.STEP
                                    [format] => STEP
                                    [size] => 3974549
                                    [mainImage] => 0
                                    [date] => 2017-09-08 11:48:38
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 38
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 10154
                                    [uid] => 5451
                                    [nid] => 2278
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2278/lose weight box.STL
                                    [filename] => lose weight box.STL
                                    [format] => STL
                                    [size] => 2022084
                                    [mainImage] => 0
                                    [date] => 2017-09-08 11:49:16
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 40
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [3] => stdClass Object
                                (
                                    [id] => 10153
                                    [uid] => 5451
                                    [nid] => 2278
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2278/Lid.STL
                                    [filename] => Lid.STL
                                    [format] => STL
                                    [size] => 1749484
                                    [mainImage] => 0
                                    [date] => 2017-09-08 11:49:02
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 40
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [4] => stdClass Object
                                (
                                    [id] => 10148
                                    [uid] => 5451
                                    [nid] => 2278
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2278/b.jpg
                                    [filename] => b.jpg
                                    [format] => JPG
                                    [size] => 277155
                                    [mainImage] => 0
                                    [date] => 2017-09-08 11:47:23
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [5] => stdClass Object
                                (
                                    [id] => 10151
                                    [uid] => 5451
                                    [nid] => 2278
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2278/lose weight box-Base.STL
                                    [filename] => lose weight box-Base.STL
                                    [format] => STL
                                    [size] => 272684
                                    [mainImage] => 0
                                    [date] => 2017-09-08 11:48:02
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 40
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [6] => stdClass Object
                                (
                                    [id] => 10150
                                    [uid] => 5451
                                    [nid] => 2278
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2278/lose weight box-Base.STEP
                                    [filename] => lose weight box-Base.STEP
                                    [format] => STEP
                                    [size] => 222032
                                    [mainImage] => 0
                                    [date] => 2017-09-08 11:48:02
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 38
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [7] => stdClass Object
                                (
                                    [id] => 10147
                                    [uid] => 5451
                                    [nid] => 2278
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2278/a.jpg
                                    [filename] => a.jpg
                                    [format] => JPG
                                    [size] => 214796
                                    [mainImage] => 1
                                    [date] => 2017-09-08 11:47:21
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [8] => stdClass Object
                                (
                                    [id] => 10149
                                    [uid] => 5451
                                    [nid] => 2278
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2278/c.jpg
                                    [filename] => c.jpg
                                    [format] => JPG
                                    [size] => 158583
                                    [mainImage] => 0
                                    [date] => 2017-09-08 11:47:35
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 12.81 MB
                    [numDownloads] => 0
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [18] => stdClass Object
                (
                    [id] => 2277
                    [title] => It's either YOU or ME - better You
                    [software] => 
                    [version] => 
                    [description] => This model will be a perfect desk reminder for you that smoking can kill your health. You should make a choice to kill (quit) smoking or smoking kill your health. Hopefully it's the former and you should keep that promise. 
                    [viewerfile] => either you or me.STEP
                    [video] => 
                    [access] => 0
                    [added] => 2017-09-08 11:46:38
                    [updated] => 2017-09-08 11:46:38
                    [uid] => 5451
                    [tags] => kills, guillotine, health, smoking, print, desk, 3d, assembly
                    [classification] => 13
                    [permalink] => its-either-you-or-me-better-you
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 10145
                    [mainImage] => 1.jpg
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 10146
                                    [uid] => 5451
                                    [nid] => 2277
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2277/sliced cigarette.STEP
                                    [filename] => sliced cigarette.STEP
                                    [format] => STEP
                                    [size] => 23421419
                                    [mainImage] => 0
                                    [date] => 2017-09-08 11:46:33
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 38
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 10145
                                    [uid] => 5451
                                    [nid] => 2277
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2277/either you or me.STEP
                                    [filename] => either you or me.STEP
                                    [format] => STEP
                                    [size] => 19411361
                                    [mainImage] => 0
                                    [date] => 2017-09-08 11:45:38
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 38
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 10144
                                    [uid] => 5451
                                    [nid] => 2277
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2277/sliced cigarette.STL
                                    [filename] => sliced cigarette.STL
                                    [format] => STL
                                    [size] => 7723084
                                    [mainImage] => 0
                                    [date] => 2017-09-08 11:40:58
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 40
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [3] => stdClass Object
                                (
                                    [id] => 10143
                                    [uid] => 5451
                                    [nid] => 2277
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2277/either you or me - Upper Support-1.STL
                                    [filename] => either you or me - Upper Support-1.STL
                                    [format] => STL
                                    [size] => 5071784
                                    [mainImage] => 0
                                    [date] => 2017-09-08 11:39:31
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 40
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [4] => stdClass Object
                                (
                                    [id] => 10140
                                    [uid] => 5451
                                    [nid] => 2277
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2277/either you or me - Base Support-1.STL
                                    [filename] => either you or me - Base Support-1.STL
                                    [format] => STL
                                    [size] => 1115284
                                    [mainImage] => 0
                                    [date] => 2017-09-08 11:37:47
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 40
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [5] => stdClass Object
                                (
                                    [id] => 10141
                                    [uid] => 5451
                                    [nid] => 2277
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2277/either you or me - Blade Arc-1.STL
                                    [filename] => either you or me - Blade Arc-1.STL
                                    [format] => STL
                                    [size] => 361684
                                    [mainImage] => 0
                                    [date] => 2017-09-08 11:37:49
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 40
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [6] => stdClass Object
                                (
                                    [id] => 10139
                                    [uid] => 5451
                                    [nid] => 2277
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2277/either you or me - Base-1.STL
                                    [filename] => either you or me - Base-1.STL
                                    [format] => STL
                                    [size] => 307484
                                    [mainImage] => 0
                                    [date] => 2017-09-08 11:37:40
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 40
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [7] => stdClass Object
                                (
                                    [id] => 10138
                                    [uid] => 5451
                                    [nid] => 2277
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2277/either you or me - Bucket-1.STL
                                    [filename] => either you or me - Bucket-1.STL
                                    [format] => STL
                                    [size] => 301084
                                    [mainImage] => 0
                                    [date] => 2017-09-08 11:37:35
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 40
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [8] => stdClass Object
                                (
                                    [id] => 10142
                                    [uid] => 5451
                                    [nid] => 2277
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2277/either you or me - Convict-1.STL
                                    [filename] => either you or me - Convict-1.STL
                                    [format] => STL
                                    [size] => 300984
                                    [mainImage] => 0
                                    [date] => 2017-09-08 11:38:03
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 40
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [9] => stdClass Object
                                (
                                    [id] => 10131
                                    [uid] => 5451
                                    [nid] => 2277
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2277/1.jpg
                                    [filename] => 1.jpg
                                    [format] => JPG
                                    [size] => 257305
                                    [mainImage] => 1
                                    [date] => 2017-09-08 11:37:08
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [10] => stdClass Object
                                (
                                    [id] => 10135
                                    [uid] => 5451
                                    [nid] => 2277
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2277/either you or me - Bucket Handle-1.STL
                                    [filename] => either you or me - Bucket Handle-1.STL
                                    [format] => STL
                                    [size] => 255484
                                    [mainImage] => 0
                                    [date] => 2017-09-08 11:37:24
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 40
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [11] => stdClass Object
                                (
                                    [id] => 10132
                                    [uid] => 5451
                                    [nid] => 2277
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2277/2.jpg
                                    [filename] => 2.jpg
                                    [format] => JPG
                                    [size] => 244441
                                    [mainImage] => 0
                                    [date] => 2017-09-08 11:37:14
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [12] => stdClass Object
                                (
                                    [id] => 10137
                                    [uid] => 5451
                                    [nid] => 2277
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2277/4.jpg
                                    [filename] => 4.jpg
                                    [format] => JPG
                                    [size] => 220546
                                    [mainImage] => 0
                                    [date] => 2017-09-08 11:37:26
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [13] => stdClass Object
                                (
                                    [id] => 10134
                                    [uid] => 5451
                                    [nid] => 2277
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2277/3.jpg
                                    [filename] => 3.jpg
                                    [format] => JPG
                                    [size] => 141003
                                    [mainImage] => 0
                                    [date] => 2017-09-08 11:37:19
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [14] => stdClass Object
                                (
                                    [id] => 10136
                                    [uid] => 5451
                                    [nid] => 2277
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2277/either you or me - Head Lock-1.STL
                                    [filename] => either you or me - Head Lock-1.STL
                                    [format] => STL
                                    [size] => 9284
                                    [mainImage] => 0
                                    [date] => 2017-09-08 11:37:25
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 40
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [15] => stdClass Object
                                (
                                    [id] => 10133
                                    [uid] => 5451
                                    [nid] => 2277
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2277/either you or me - Blade-1.STL
                                    [filename] => either you or me - Blade-1.STL
                                    [format] => STL
                                    [size] => 684
                                    [mainImage] => 0
                                    [date] => 2017-09-08 11:37:17
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 40
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 56.4 MB
                    [numDownloads] => 1
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [19] => stdClass Object
                (
                    [id] => 2276
                    [title] => Helix Lateral Trainer X1
                    [software] => 
                    [version] => 
                    [description] => My design is unique and functional because: 



- it is smooth, aesthetic and simple 

- designed with as many common parts that are used on both units as possible 

- specific parts of the casing will be easily removable for repair or service access 

- manufacturable with low costs and with common methods such as injection molding 

- strong and durable enough for daily usage 

                    [viewerfile] => MR04_TILTED_03-06-2015_A.STEP
                    [video] => 
                    [access] => 0
                    [added] => 2017-09-08 11:35:56
                    [updated] => 2017-09-08 11:35:56
                    [uid] => 5451
                    [tags] => lose, fit, trainer, exercise, helix, gym, plastic, metal, case, machine, weight, trainercasing
                    [classification] => 14
                    [permalink] => helix-lateral-trainer-x1
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 10129
                    [mainImage] => a.jpg
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 10130
                                    [uid] => 5451
                                    [nid] => 2276
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2276/MR04_RECUMBANT_03-06-2015_A.STEP
                                    [filename] => MR04_RECUMBANT_03-06-2015_A.STEP
                                    [format] => STEP
                                    [size] => 95437852
                                    [mainImage] => 0
                                    [date] => 2017-09-08 11:35:22
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 38
                                    [is_image] => 
                                    [numDownloads] => 2
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 10129
                                    [uid] => 5451
                                    [nid] => 2276
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2276/MR04_TILTED_03-06-2015_A.STEP
                                    [filename] => MR04_TILTED_03-06-2015_A.STEP
                                    [format] => STEP
                                    [size] => 47665243
                                    [mainImage] => 0
                                    [date] => 2017-09-08 11:20:14
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 38
                                    [is_image] => 
                                    [numDownloads] => 1
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 10125
                                    [uid] => 5451
                                    [nid] => 2276
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2276/j.jpg
                                    [filename] => j.jpg
                                    [format] => JPG
                                    [size] => 292669
                                    [mainImage] => 0
                                    [date] => 2017-09-08 11:05:08
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [3] => stdClass Object
                                (
                                    [id] => 10127
                                    [uid] => 5451
                                    [nid] => 2276
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2276/k.jpg
                                    [filename] => k.jpg
                                    [format] => JPG
                                    [size] => 275183
                                    [mainImage] => 0
                                    [date] => 2017-09-08 11:05:17
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [4] => stdClass Object
                                (
                                    [id] => 10124
                                    [uid] => 5451
                                    [nid] => 2276
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2276/h.jpg
                                    [filename] => h.jpg
                                    [format] => JPG
                                    [size] => 273039
                                    [mainImage] => 0
                                    [date] => 2017-09-08 11:05:08
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [5] => stdClass Object
                                (
                                    [id] => 10123
                                    [uid] => 5451
                                    [nid] => 2276
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2276/g.jpg
                                    [filename] => g.jpg
                                    [format] => JPG
                                    [size] => 271995
                                    [mainImage] => 0
                                    [date] => 2017-09-08 11:05:07
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [6] => stdClass Object
                                (
                                    [id] => 10122
                                    [uid] => 5451
                                    [nid] => 2276
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2276/i.jpg
                                    [filename] => i.jpg
                                    [format] => JPG
                                    [size] => 258012
                                    [mainImage] => 0
                                    [date] => 2017-09-08 11:05:06
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [7] => stdClass Object
                                (
                                    [id] => 10126
                                    [uid] => 5451
                                    [nid] => 2276
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2276/l.jpg
                                    [filename] => l.jpg
                                    [format] => JPG
                                    [size] => 223382
                                    [mainImage] => 0
                                    [date] => 2017-09-08 11:05:10
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [8] => stdClass Object
                                (
                                    [id] => 10121
                                    [uid] => 5451
                                    [nid] => 2276
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2276/e.jpg
                                    [filename] => e.jpg
                                    [format] => JPG
                                    [size] => 165667
                                    [mainImage] => 0
                                    [date] => 2017-09-08 11:04:43
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [9] => stdClass Object
                                (
                                    [id] => 10116
                                    [uid] => 5451
                                    [nid] => 2276
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2276/a.jpg
                                    [filename] => a.jpg
                                    [format] => JPG
                                    [size] => 159965
                                    [mainImage] => 1
                                    [date] => 2017-09-08 11:04:36
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [10] => stdClass Object
                                (
                                    [id] => 10119
                                    [uid] => 5451
                                    [nid] => 2276
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2276/d.jpg
                                    [filename] => d.jpg
                                    [format] => JPG
                                    [size] => 147722
                                    [mainImage] => 0
                                    [date] => 2017-09-08 11:04:39
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [11] => stdClass Object
                                (
                                    [id] => 10120
                                    [uid] => 5451
                                    [nid] => 2276
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2276/f.jpg
                                    [filename] => f.jpg
                                    [format] => JPG
                                    [size] => 145431
                                    [mainImage] => 0
                                    [date] => 2017-09-08 11:04:43
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [12] => stdClass Object
                                (
                                    [id] => 10118
                                    [uid] => 5451
                                    [nid] => 2276
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2276/c.jpg
                                    [filename] => c.jpg
                                    [format] => JPG
                                    [size] => 142189
                                    [mainImage] => 0
                                    [date] => 2017-09-08 11:04:38
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [13] => stdClass Object
                                (
                                    [id] => 10117
                                    [uid] => 5451
                                    [nid] => 2276
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2276/b.jpg
                                    [filename] => b.jpg
                                    [format] => JPG
                                    [size] => 116540
                                    [mainImage] => 0
                                    [date] => 2017-09-08 11:04:37
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 138.83 MB
                    [numDownloads] => 3
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [20] => stdClass Object
                (
                    [id] => 2275
                    [title] => Good Lung vs Bad Lung Pendant
                    [software] => 
                    [version] => 
                    [description] => This pendant serves as a reminder of the consequences of constant smoking and your promise to quit for the new year. 
                    [viewerfile] => Good vs Bad Lung Comparison.STEP
                    [video] => 
                    [access] => 0
                    [added] => 2017-09-08 11:03:16
                    [updated] => 2017-09-08 11:03:16
                    [uid] => 5451
                    [tags] => lung, unmakeable, token, bad, pendant, good, print, plastic, 3d
                    [classification] => 16
                    [permalink] => good-lung-vs-bad-lung-pendant
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 10115
                    [mainImage] => 1.jpg
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 10115
                                    [uid] => 5451
                                    [nid] => 2275
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2275/Good vs Bad Lung Comparison.STEP
                                    [filename] => Good vs Bad Lung Comparison.STEP
                                    [format] => STEP
                                    [size] => 12851342
                                    [mainImage] => 0
                                    [date] => 2017-09-08 11:03:07
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 38
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 10114
                                    [uid] => 5451
                                    [nid] => 2275
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2275/Good vs Bad Lung Comparison.STL
                                    [filename] => Good vs Bad Lung Comparison.STL
                                    [format] => STL
                                    [size] => 6227184
                                    [mainImage] => 0
                                    [date] => 2017-09-08 11:02:34
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 40
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 10112
                                    [uid] => 5451
                                    [nid] => 2275
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2275/1.jpg
                                    [filename] => 1.jpg
                                    [format] => JPG
                                    [size] => 235410
                                    [mainImage] => 1
                                    [date] => 2017-09-08 10:59:27
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [3] => stdClass Object
                                (
                                    [id] => 10113
                                    [uid] => 5451
                                    [nid] => 2275
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2275/2.jpg
                                    [filename] => 2.jpg
                                    [format] => JPG
                                    [size] => 199253
                                    [mainImage] => 0
                                    [date] => 2017-09-08 10:59:28
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 18.61 MB
                    [numDownloads] => 0
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [21] => stdClass Object
                (
                    [id] => 2263
                    [title] => FTSC2 Pressure Switch
                    [software] => 
                    [version] => 
                    [description] => This a micro pressure switch designed for small medical devices
                    [viewerfile] => FTSC2_QC_assembly.STEP
                    [video] => 
                    [access] => 0
                    [added] => 2017-09-05 16:53:47
                    [updated] => 2017-09-05 16:53:47
                    [uid] => 5451
                    [tags] => pressureswitch, micro, vacuum, plastic, switch, pressure, metal, electrical, equipment
                    [classification] => 34
                    [permalink] => ftsc2-pressure-switch
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 9921
                    [mainImage] => 1.14.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 9921
                                    [uid] => 5451
                                    [nid] => 2263
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2263/FTSC2_QC_assembly.STEP
                                    [filename] => FTSC2_QC_assembly.STEP
                                    [format] => STEP
                                    [size] => 4968531
                                    [mainImage] => 0
                                    [date] => 2017-09-05 16:53:28
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 38
                                    [is_image] => 
                                    [numDownloads] => 1
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 9920
                                    [uid] => 5451
                                    [nid] => 2263
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2263/1.14.png
                                    [filename] => 1.14.png
                                    [format] => PNG
                                    [size] => 410142
                                    [mainImage] => 1
                                    [date] => 2017-09-05 16:52:32
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 5.13 MB
                    [numDownloads] => 1
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [22] => stdClass Object
                (
                    [id] => 2262
                    [title] => FTSC1 Pressure Switch
                    [software] => 
                    [version] => 
                    [description] => This a micro pressure switch designed for small medical devices
                    [viewerfile] => FTSC1_QC_assembly.STEP
                    [video] => 
                    [access] => 0
                    [added] => 2017-09-05 16:51:07
                    [updated] => 2017-09-05 16:51:07
                    [uid] => 5451
                    [tags] => pressureswitch, micro, vacuum, plastic, switch, pressure, metal, electrical, equipment
                    [classification] => 34
                    [permalink] => ftsc1-pressure-switch
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 9919
                    [mainImage] => 1.12.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 9919
                                    [uid] => 5451
                                    [nid] => 2262
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2262/FTSC1_QC_assembly.STEP
                                    [filename] => FTSC1_QC_assembly.STEP
                                    [format] => STEP
                                    [size] => 4806568
                                    [mainImage] => 0
                                    [date] => 2017-09-05 16:48:56
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 38
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 9918
                                    [uid] => 5451
                                    [nid] => 2262
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2262/1.12.png
                                    [filename] => 1.12.png
                                    [format] => PNG
                                    [size] => 453021
                                    [mainImage] => 1
                                    [date] => 2017-09-05 16:47:30
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 5.02 MB
                    [numDownloads] => 0
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [23] => stdClass Object
                (
                    [id] => 2261
                    [title] => Family Time Stencil
                    [software] => 
                    [version] => 
                    [description] => This fun stencil is designed for your young ones to create cute artwork. You will create this together with colorful pens to display around your home, work and play. This is a great way to bring the family together. Hope you like it! 
                    [viewerfile] => family.STEP
                    [video] => 
                    [access] => 0
                    [added] => 2017-09-05 16:45:39
                    [updated] => 2017-09-05 16:45:39
                    [uid] => 5451
                    [tags] => nephew, niece, cousin, sister, daddy, mommy, dad, father, brother, daughter, son, mom, love, family, heart, stencil, mother, print, big, plastic, 3d, small
                    [classification] => 14
                    [permalink] => family-time-stencil
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 9917
                    [mainImage] => 1.JPG
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 9917
                                    [uid] => 5451
                                    [nid] => 2261
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2261/family.STEP
                                    [filename] => family.STEP
                                    [format] => STEP
                                    [size] => 21347678
                                    [mainImage] => 0
                                    [date] => 2017-09-05 16:44:15
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 38
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 9916
                                    [uid] => 5451
                                    [nid] => 2261
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2261/family.STL
                                    [filename] => family.STL
                                    [format] => STL
                                    [size] => 3856984
                                    [mainImage] => 0
                                    [date] => 2017-09-05 16:41:31
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 40
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 9915
                                    [uid] => 5451
                                    [nid] => 2261
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2261/1.JPG
                                    [filename] => 1.JPG
                                    [format] => JPG
                                    [size] => 127557
                                    [mainImage] => 1
                                    [date] => 2017-09-05 16:40:18
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 24.16 MB
                    [numDownloads] => 0
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [24] => stdClass Object
                (
                    [id] => 2260
                    [title] => Accessory Belt
                    [software] => 
                    [version] => 
                    [description] => This product comes in various styles and colors. It is highly customizable!
                    [viewerfile] => adjustable belt.STEP
                    [video] => 
                    [access] => 0
                    [added] => 2017-09-05 16:38:30
                    [updated] => 2017-09-05 16:39:44
                    [uid] => 5451
                    [tags] => user, strap, male, batman, film, female, utility, child, battery, human, belt, lens, accessory, holder, camera, filter
                    [classification] => 35
                    [permalink] => accessory-belt
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 9914
                    [mainImage] => 5.JPG
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 9914
                                    [uid] => 5451
                                    [nid] => 2260
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2260/adjustable belt.STEP
                                    [filename] => adjustable belt.STEP
                                    [format] => STEP
                                    [size] => 5876448
                                    [mainImage] => 0
                                    [date] => 2017-09-05 16:37:45
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 38
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 9913
                                    [uid] => 5451
                                    [nid] => 2260
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2260/5.JPG
                                    [filename] => 5.JPG
                                    [format] => JPG
                                    [size] => 112930
                                    [mainImage] => 1
                                    [date] => 2017-09-05 16:36:39
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 9912
                                    [uid] => 5451
                                    [nid] => 2260
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2260/4.JPG
                                    [filename] => 4.JPG
                                    [format] => JPG
                                    [size] => 84737
                                    [mainImage] => 0
                                    [date] => 2017-09-05 16:36:39
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [3] => stdClass Object
                                (
                                    [id] => 9911
                                    [uid] => 5451
                                    [nid] => 2260
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2260/3.JPG
                                    [filename] => 3.JPG
                                    [format] => JPG
                                    [size] => 72160
                                    [mainImage] => 0
                                    [date] => 2017-09-05 16:36:37
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 5.86 MB
                    [numDownloads] => 0
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [25] => stdClass Object
                (
                    [id] => 2259
                    [title] => AA Battery Casing
                    [software] => 
                    [version] => 
                    [description] => This case mounts 3 AA batteries.
                    [viewerfile] => Flashlight battery casing.IGS
                    [video] => 
                    [access] => 0
                    [added] => 2017-09-05 16:33:57
                    [updated] => 2017-09-05 16:33:57
                    [uid] => 5451
                    [tags] => pack, aaa, torch, holder, plastic, flashlight, spring, electrical, case, electronic, battery, housing, aa
                    [classification] => 6
                    [permalink] => aa-battery-casing
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 9909
                    [mainImage] => untitled.16.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 9909
                                    [uid] => 5451
                                    [nid] => 2259
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2259/Flashlight battery casing.IGS
                                    [filename] => Flashlight battery casing.IGS
                                    [format] => IGS
                                    [size] => 4207502
                                    [mainImage] => 0
                                    [date] => 2017-09-05 16:31:57
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 17
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 9910
                                    [uid] => 5451
                                    [nid] => 2259
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2259/Flashlight battery casing.SLDPRT
                                    [filename] => Flashlight battery casing.SLDPRT
                                    [format] => SLDPRT
                                    [size] => 4042240
                                    [mainImage] => 0
                                    [date] => 2017-09-05 16:32:04
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 37
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 9908
                                    [uid] => 5451
                                    [nid] => 2259
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2259/untitled.16.png
                                    [filename] => untitled.16.png
                                    [format] => PNG
                                    [size] => 290657
                                    [mainImage] => 1
                                    [date] => 2017-09-05 16:30:38
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [3] => stdClass Object
                                (
                                    [id] => 9907
                                    [uid] => 5451
                                    [nid] => 2259
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2259/untitled.17.png
                                    [filename] => untitled.17.png
                                    [format] => PNG
                                    [size] => 245571
                                    [mainImage] => 0
                                    [date] => 2017-09-05 16:30:38
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 8.38 MB
                    [numDownloads] => 0
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [26] => stdClass Object
                (
                    [id] => 2258
                    [title] => Zenvo Logo
                    [software] => 
                    [version] => 
                    [description] => A Zenvo logo
                    [viewerfile] => zenvo logo.IGS
                    [video] => 
                    [access] => 0
                    [added] => 2017-09-01 12:55:35
                    [updated] => 2017-09-01 12:55:35
                    [uid] => 5451
                    [tags] => zenvo,logo,car
                    [classification] => 2
                    [permalink] => zenvo-logo
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 9904
                    [mainImage] => render1.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 9905
                                    [uid] => 5451
                                    [nid] => 2258
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2258/zenvo logo.SLDPRT
                                    [filename] => zenvo logo.SLDPRT
                                    [format] => SLDPRT
                                    [size] => 1562624
                                    [mainImage] => 0
                                    [date] => 2017-09-01 12:54:46
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 37
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 9904
                                    [uid] => 5451
                                    [nid] => 2258
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2258/zenvo logo.IGS
                                    [filename] => zenvo logo.IGS
                                    [format] => IGS
                                    [size] => 1237216
                                    [mainImage] => 0
                                    [date] => 2017-09-01 12:54:42
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 17
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 9906
                                    [uid] => 5451
                                    [nid] => 2258
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2258/render1.png
                                    [filename] => render1.png
                                    [format] => PNG
                                    [size] => 791592
                                    [mainImage] => 1
                                    [date] => 2017-09-01 12:54:51
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 3.43 MB
                    [numDownloads] => 0
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [27] => stdClass Object
                (
                    [id] => 2257
                    [title] => VW Logo
                    [software] => 
                    [version] => 
                    [description] => A VW logo
                    [viewerfile] => vw logo.IGS
                    [video] => 
                    [access] => 0
                    [added] => 2017-09-01 12:53:43
                    [updated] => 2017-09-01 12:53:43
                    [uid] => 5451
                    [tags] => vw,logo,car
                    [classification] => 2
                    [permalink] => vw-logo
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 9901
                    [mainImage] => render1.png
                    [showViewer] => 
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 9903
                                    [uid] => 5451
                                    [nid] => 2257
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2257/render1.png
                                    [filename] => render1.png
                                    [format] => PNG
                                    [size] => 935260
                                    [mainImage] => 1
                                    [date] => 2017-09-01 12:53:01
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 9902
                                    [uid] => 5451
                                    [nid] => 2257
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2257/vw logo.SLDPRT
                                    [filename] => vw logo.SLDPRT
                                    [format] => SLDPRT
                                    [size] => 488448
                                    [mainImage] => 0
                                    [date] => 2017-09-01 12:53:00
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 37
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 9901
                                    [uid] => 5451
                                    [nid] => 2257
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2257/vw logo.IGS
                                    [filename] => vw logo.IGS
                                    [format] => IGS
                                    [size] => 273224
                                    [mainImage] => 0
                                    [date] => 2017-09-01 12:52:50
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 17
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 1.62 MB
                    [numDownloads] => 1
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [28] => stdClass Object
                (
                    [id] => 2256
                    [title] => Volvo Logo
                    [software] => 
                    [version] => 
                    [description] => A Volvo logo
                    [viewerfile] => volvo logo.IGS
                    [video] => 
                    [access] => 0
                    [added] => 2017-09-01 12:52:09
                    [updated] => 2017-09-01 12:52:09
                    [uid] => 5451
                    [tags] => volvo,logo,car
                    [classification] => 2
                    [permalink] => volvo-logo
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 9898
                    [mainImage] => render1.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 9900
                                    [uid] => 5451
                                    [nid] => 2256
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2256/volvo logo.SLDPRT
                                    [filename] => volvo logo.SLDPRT
                                    [format] => SLDPRT
                                    [size] => 1996800
                                    [mainImage] => 0
                                    [date] => 2017-09-01 12:51:32
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 37
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 9898
                                    [uid] => 5451
                                    [nid] => 2256
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2256/volvo logo.IGS
                                    [filename] => volvo logo.IGS
                                    [format] => IGS
                                    [size] => 1014586
                                    [mainImage] => 0
                                    [date] => 2017-09-01 12:51:09
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 17
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 9899
                                    [uid] => 5451
                                    [nid] => 2256
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2256/render1.png
                                    [filename] => render1.png
                                    [format] => PNG
                                    [size] => 856727
                                    [mainImage] => 1
                                    [date] => 2017-09-01 12:51:09
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 3.69 MB
                    [numDownloads] => 1
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [29] => stdClass Object
                (
                    [id] => 2255
                    [title] => Vauxhall Logo
                    [software] => 
                    [version] => 
                    [description] => A Vauxhall logo
                    [viewerfile] => vauxhall logo.STEP
                    [video] => 
                    [access] => 0
                    [added] => 2017-09-01 12:50:08
                    [updated] => 2017-09-01 12:50:08
                    [uid] => 5451
                    [tags] => vauxhall,logo,car
                    [classification] => 2
                    [permalink] => vauxhall-logo
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 9895
                    [mainImage] => render1.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 9897
                                    [uid] => 5451
                                    [nid] => 2255
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2255/vaxhall logo.SLDPRT
                                    [filename] => vaxhall logo.SLDPRT
                                    [format] => SLDPRT
                                    [size] => 3079168
                                    [mainImage] => 0
                                    [date] => 2017-09-01 12:50:00
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 37
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 9896
                                    [uid] => 5451
                                    [nid] => 2255
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2255/vaxhall logo.IGS
                                    [filename] => vaxhall logo.IGS
                                    [format] => IGS
                                    [size] => 2197190
                                    [mainImage] => 0
                                    [date] => 2017-09-01 12:49:39
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 17
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 9895
                                    [uid] => 5451
                                    [nid] => 2255
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2255/vauxhall logo.STEP
                                    [filename] => vauxhall logo.STEP
                                    [format] => STEP
                                    [size] => 1582086
                                    [mainImage] => 0
                                    [date] => 2017-09-01 12:49:31
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 38
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [3] => stdClass Object
                                (
                                    [id] => 9894
                                    [uid] => 5451
                                    [nid] => 2255
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2255/render1.png
                                    [filename] => render1.png
                                    [format] => PNG
                                    [size] => 1006232
                                    [mainImage] => 1
                                    [date] => 2017-09-01 12:48:57
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 7.5 MB
                    [numDownloads] => 1
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [30] => stdClass Object
                (
                    [id] => 2254
                    [title] => TVR Logo
                    [software] => 
                    [version] => 
                    [description] => A TVR logo
                    [viewerfile] => tvr logo.IGS
                    [video] => 
                    [access] => 0
                    [added] => 2017-09-01 12:47:34
                    [updated] => 2017-09-01 12:47:34
                    [uid] => 5451
                    [tags] => tvr,logo,car
                    [classification] => 2
                    [permalink] => tvr-logo
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 9893
                    [mainImage] => render1.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 9893
                                    [uid] => 5451
                                    [nid] => 2254
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2254/tvr logo.IGS
                                    [filename] => tvr logo.IGS
                                    [format] => IGS
                                    [size] => 1056734
                                    [mainImage] => 0
                                    [date] => 2017-09-01 12:46:31
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 17
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 9892
                                    [uid] => 5451
                                    [nid] => 2254
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2254/tvr logo.SLDPRT
                                    [filename] => tvr logo.SLDPRT
                                    [format] => SLDPRT
                                    [size] => 910336
                                    [mainImage] => 0
                                    [date] => 2017-09-01 12:46:31
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 37
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 9891
                                    [uid] => 5451
                                    [nid] => 2254
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2254/render1.png
                                    [filename] => render1.png
                                    [format] => PNG
                                    [size] => 862315
                                    [mainImage] => 1
                                    [date] => 2017-09-01 12:46:22
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 2.7 MB
                    [numDownloads] => 0
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [31] => stdClass Object
                (
                    [id] => 2253
                    [title] => Toyota Logo
                    [software] => 
                    [version] => 
                    [description] => A Toyota logo
                    [viewerfile] => toyota logo.IGS
                    [video] => 
                    [access] => 0
                    [added] => 2017-09-01 12:45:27
                    [updated] => 2017-09-01 12:45:27
                    [uid] => 5451
                    [tags] => toyota,logo,car
                    [classification] => 2
                    [permalink] => toyota-logo
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 9889
                    [mainImage] => render1.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 9890
                                    [uid] => 5451
                                    [nid] => 2253
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2253/render1.png
                                    [filename] => render1.png
                                    [format] => PNG
                                    [size] => 946673
                                    [mainImage] => 1
                                    [date] => 2017-09-01 12:44:32
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 4
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 9888
                                    [uid] => 5451
                                    [nid] => 2253
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2253/toyota logo.SLDPRT
                                    [filename] => toyota logo.SLDPRT
                                    [format] => SLDPRT
                                    [size] => 784384
                                    [mainImage] => 0
                                    [date] => 2017-09-01 12:44:26
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 37
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 9889
                                    [uid] => 5451
                                    [nid] => 2253
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2253/toyota logo.IGS
                                    [filename] => toyota logo.IGS
                                    [format] => IGS
                                    [size] => 651490
                                    [mainImage] => 0
                                    [date] => 2017-09-01 12:44:26
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 17
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 2.27 MB
                    [numDownloads] => 7
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [32] => stdClass Object
                (
                    [id] => 2252
                    [title] => Suzuki Logo
                    [software] => 
                    [version] => 
                    [description] => A Suzuki logo
                    [viewerfile] => suzuki logo.IGS
                    [video] => 
                    [access] => 0
                    [added] => 2017-09-01 12:43:17
                    [updated] => 2017-09-01 12:43:17
                    [uid] => 5451
                    [tags] => suzuki,logo,car
                    [classification] => 2
                    [permalink] => suzuki-logo
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 9884
                    [mainImage] => render1.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 9886
                                    [uid] => 5451
                                    [nid] => 2252
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2252/render1.png
                                    [filename] => render1.png
                                    [format] => PNG
                                    [size] => 866191
                                    [mainImage] => 1
                                    [date] => 2017-09-01 12:42:13
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 9887
                                    [uid] => 5451
                                    [nid] => 2252
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2252/suzuki logo.SLDPRT
                                    [filename] => suzuki logo.SLDPRT
                                    [format] => SLDPRT
                                    [size] => 767531
                                    [mainImage] => 0
                                    [date] => 2017-09-01 12:42:18
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 37
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 9885
                                    [uid] => 5451
                                    [nid] => 2252
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2252/suzuki logo.STEP
                                    [filename] => suzuki logo.STEP
                                    [format] => STEP
                                    [size] => 533699
                                    [mainImage] => 0
                                    [date] => 2017-09-01 12:42:11
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 38
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [3] => stdClass Object
                                (
                                    [id] => 9884
                                    [uid] => 5451
                                    [nid] => 2252
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2252/suzuki logo.IGS
                                    [filename] => suzuki logo.IGS
                                    [format] => IGS
                                    [size] => 213938
                                    [mainImage] => 0
                                    [date] => 2017-09-01 12:42:01
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 17
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 2.27 MB
                    [numDownloads] => 0
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [33] => stdClass Object
                (
                    [id] => 2251
                    [title] => Subaru Logo
                    [software] => 
                    [version] => 
                    [description] => A Subaru logo
                    [viewerfile] => subaru logo.IGS
                    [video] => 
                    [access] => 0
                    [added] => 2017-09-01 12:41:01
                    [updated] => 2017-09-01 12:41:01
                    [uid] => 5451
                    [tags] => subaru,logo,car
                    [classification] => 2
                    [permalink] => subaru-logo
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 9882
                    [mainImage] => render1.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 9883
                                    [uid] => 5451
                                    [nid] => 2251
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2251/subaru logo.SLDPRT
                                    [filename] => subaru logo.SLDPRT
                                    [format] => SLDPRT
                                    [size] => 6624256
                                    [mainImage] => 0
                                    [date] => 2017-09-01 12:40:49
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 37
                                    [is_image] => 
                                    [numDownloads] => 1
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 9882
                                    [uid] => 5451
                                    [nid] => 2251
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2251/subaru logo.IGS
                                    [filename] => subaru logo.IGS
                                    [format] => IGS
                                    [size] => 2777094
                                    [mainImage] => 0
                                    [date] => 2017-09-01 12:39:41
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 17
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 9881
                                    [uid] => 5451
                                    [nid] => 2251
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2251/render1.png
                                    [filename] => render1.png
                                    [format] => PNG
                                    [size] => 1066278
                                    [mainImage] => 1
                                    [date] => 2017-09-01 12:39:26
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 9.98 MB
                    [numDownloads] => 1
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [34] => stdClass Object
                (
                    [id] => 2250
                    [title] => Ssangyoung Logo
                    [software] => 
                    [version] => 
                    [description] => A Ssangyoung logo
                    [viewerfile] => ssangyoung logo.IGS
                    [video] => 
                    [access] => 0
                    [added] => 2017-09-01 12:38:21
                    [updated] => 2017-09-01 12:38:21
                    [uid] => 5451
                    [tags] => ssangyoung,logo,car
                    [classification] => 2
                    [permalink] => ssangyoung-logo
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 9879
                    [mainImage] => render1.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 9880
                                    [uid] => 5451
                                    [nid] => 2250
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2250/ssangyoung logo.SLDPRT
                                    [filename] => ssangyoung logo.SLDPRT
                                    [format] => SLDPRT
                                    [size] => 2699264
                                    [mainImage] => 0
                                    [date] => 2017-09-01 12:37:21
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 37
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 9879
                                    [uid] => 5451
                                    [nid] => 2250
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2250/ssangyoung logo.IGS
                                    [filename] => ssangyoung logo.IGS
                                    [format] => IGS
                                    [size] => 1060342
                                    [mainImage] => 0
                                    [date] => 2017-09-01 12:36:57
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 17
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 9878
                                    [uid] => 5451
                                    [nid] => 2250
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2250/render1.png
                                    [filename] => render1.png
                                    [format] => PNG
                                    [size] => 928158
                                    [mainImage] => 1
                                    [date] => 2017-09-01 12:36:54
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 4.47 MB
                    [numDownloads] => 0
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [35] => stdClass Object
                (
                    [id] => 2249
                    [title] => Skoda Logo
                    [software] => 
                    [version] => 
                    [description] => A Skoda logo
                    [viewerfile] => skoda logo.IGS
                    [video] => 
                    [access] => 0
                    [added] => 2017-09-01 12:35:46
                    [updated] => 2017-09-01 12:35:46
                    [uid] => 5451
                    [tags] => skoda,logo,car
                    [classification] => 2
                    [permalink] => skoda-logo
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 9876
                    [mainImage] => render1.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 9877
                                    [uid] => 5451
                                    [nid] => 2249
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2249/skoda logo.SLDPRT
                                    [filename] => skoda logo.SLDPRT
                                    [format] => SLDPRT
                                    [size] => 3982848
                                    [mainImage] => 0
                                    [date] => 2017-09-01 12:35:37
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 37
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 9876
                                    [uid] => 5451
                                    [nid] => 2249
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2249/skoda logo.IGS
                                    [filename] => skoda logo.IGS
                                    [format] => IGS
                                    [size] => 2526092
                                    [mainImage] => 0
                                    [date] => 2017-09-01 12:35:09
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 17
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 9875
                                    [uid] => 5451
                                    [nid] => 2249
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2249/render1.png
                                    [filename] => render1.png
                                    [format] => PNG
                                    [size] => 896472
                                    [mainImage] => 1
                                    [date] => 2017-09-01 12:34:34
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 7.06 MB
                    [numDownloads] => 0
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [36] => stdClass Object
                (
                    [id] => 2248
                    [title] => Seat Logo
                    [software] => 
                    [version] => 
                    [description] => A Seat logo
                    [viewerfile] => seat logo.IGS
                    [video] => 
                    [access] => 0
                    [added] => 2017-09-01 12:33:30
                    [updated] => 2017-09-01 12:33:30
                    [uid] => 5451
                    [tags] => seat,logo,car
                    [classification] => 2
                    [permalink] => seat-logo
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 9872
                    [mainImage] => render1.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 9874
                                    [uid] => 5451
                                    [nid] => 2248
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2248/seat logo.SLDPRT
                                    [filename] => seat logo.SLDPRT
                                    [format] => SLDPRT
                                    [size] => 1466368
                                    [mainImage] => 0
                                    [date] => 2017-09-01 12:32:51
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 37
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 9873
                                    [uid] => 5451
                                    [nid] => 2248
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2248/render1.png
                                    [filename] => render1.png
                                    [format] => PNG
                                    [size] => 937157
                                    [mainImage] => 1
                                    [date] => 2017-09-01 12:32:45
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 9872
                                    [uid] => 5451
                                    [nid] => 2248
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2248/seat logo.IGS
                                    [filename] => seat logo.IGS
                                    [format] => IGS
                                    [size] => 504218
                                    [mainImage] => 0
                                    [date] => 2017-09-01 12:32:38
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 17
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 2.77 MB
                    [numDownloads] => 0
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [37] => stdClass Object
                (
                    [id] => 2247
                    [title] => Scion Logo
                    [software] => 
                    [version] => 
                    [description] => A Scion logo
                    [viewerfile] => scion logo.IGS
                    [video] => 
                    [access] => 0
                    [added] => 2017-09-01 12:31:40
                    [updated] => 2017-09-01 12:31:40
                    [uid] => 5451
                    [tags] => scion,logo,car
                    [classification] => 2
                    [permalink] => scion-logo
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 9868
                    [mainImage] => render1.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 9868
                                    [uid] => 5451
                                    [nid] => 2247
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2247/scion logo.IGS
                                    [filename] => scion logo.IGS
                                    [format] => IGS
                                    [size] => 1142834
                                    [mainImage] => 0
                                    [date] => 2017-09-01 12:30:41
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 17
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 9870
                                    [uid] => 5451
                                    [nid] => 2247
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2247/scion logo.SLDPRT
                                    [filename] => scion logo.SLDPRT
                                    [format] => SLDPRT
                                    [size] => 936448
                                    [mainImage] => 0
                                    [date] => 2017-09-01 12:30:52
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 37
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 9869
                                    [uid] => 5451
                                    [nid] => 2247
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2247/render1.png
                                    [filename] => render1.png
                                    [format] => PNG
                                    [size] => 925866
                                    [mainImage] => 1
                                    [date] => 2017-09-01 12:30:41
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [3] => stdClass Object
                                (
                                    [id] => 9871
                                    [uid] => 5451
                                    [nid] => 2247
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2247/scion logo.STEP
                                    [filename] => scion logo.STEP
                                    [format] => STEP
                                    [size] => 733764
                                    [mainImage] => 0
                                    [date] => 2017-09-01 12:30:54
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 38
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 3.57 MB
                    [numDownloads] => 0
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [38] => stdClass Object
                (
                    [id] => 2246
                    [title] => Saturn Logo
                    [software] => 
                    [version] => 
                    [description] => A Saturn logo
                    [viewerfile] => saturn logo.IGS
                    [video] => 
                    [access] => 0
                    [added] => 2017-09-01 12:29:18
                    [updated] => 2017-09-01 12:29:18
                    [uid] => 5451
                    [tags] => saturn,logo,car
                    [classification] => 2
                    [permalink] => saturn-logo
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 9865
                    [mainImage] => render1.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 9867
                                    [uid] => 5451
                                    [nid] => 2246
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2246/saturn logo.SLDPRT
                                    [filename] => saturn logo.SLDPRT
                                    [format] => SLDPRT
                                    [size] => 1397760
                                    [mainImage] => 0
                                    [date] => 2017-09-01 12:28:31
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 37
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 9866
                                    [uid] => 5451
                                    [nid] => 2246
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2246/render1.png
                                    [filename] => render1.png
                                    [format] => PNG
                                    [size] => 895948
                                    [mainImage] => 1
                                    [date] => 2017-09-01 12:28:19
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 9865
                                    [uid] => 5451
                                    [nid] => 2246
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2246/saturn logo.IGS
                                    [filename] => saturn logo.IGS
                                    [format] => IGS
                                    [size] => 502086
                                    [mainImage] => 0
                                    [date] => 2017-09-01 12:28:15
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 17
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 2.67 MB
                    [numDownloads] => 0
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [39] => stdClass Object
                (
                    [id] => 2245
                    [title] => Saab Logo
                    [software] => 
                    [version] => 
                    [description] => A Saab logo
                    [viewerfile] => saab logo.IGS
                    [video] => 
                    [access] => 0
                    [added] => 2017-09-01 12:27:30
                    [updated] => 2017-09-01 12:27:30
                    [uid] => 5451
                    [tags] => saab,logo,car
                    [classification] => 2
                    [permalink] => saab-logo
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 9864
                    [mainImage] => render1.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 9863
                                    [uid] => 5451
                                    [nid] => 2245
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2245/saab logo.SLDPRT
                                    [filename] => saab logo.SLDPRT
                                    [format] => SLDPRT
                                    [size] => 2396672
                                    [mainImage] => 0
                                    [date] => 2017-09-01 12:26:45
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 37
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 9864
                                    [uid] => 5451
                                    [nid] => 2245
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2245/saab logo.IGS
                                    [filename] => saab logo.IGS
                                    [format] => IGS
                                    [size] => 1887476
                                    [mainImage] => 0
                                    [date] => 2017-09-01 12:26:49
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 17
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 9862
                                    [uid] => 5451
                                    [nid] => 2245
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2245/render1.png
                                    [filename] => render1.png
                                    [format] => PNG
                                    [size] => 1085064
                                    [mainImage] => 1
                                    [date] => 2017-09-01 12:26:24
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 5.12 MB
                    [numDownloads] => 0
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [40] => stdClass Object
                (
                    [id] => 2244
                    [title] => RUF Logo
                    [software] => 
                    [version] => 
                    [description] => A RUF logo
                    [viewerfile] => ruf logo.IGS
                    [video] => 
                    [access] => 0
                    [added] => 2017-09-01 12:25:18
                    [updated] => 2017-09-01 12:25:18
                    [uid] => 5451
                    [tags] => ruf,car,logo
                    [classification] => 2
                    [permalink] => ruf-logo
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 9859
                    [mainImage] => render1.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 9860
                                    [uid] => 5451
                                    [nid] => 2244
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2244/render1.png
                                    [filename] => render1.png
                                    [format] => PNG
                                    [size] => 845741
                                    [mainImage] => 1
                                    [date] => 2017-09-01 12:24:20
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 9859
                                    [uid] => 5451
                                    [nid] => 2244
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2244/ruf logo.IGS
                                    [filename] => ruf logo.IGS
                                    [format] => IGS
                                    [size] => 379906
                                    [mainImage] => 0
                                    [date] => 2017-09-01 12:24:16
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 17
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 9861
                                    [uid] => 5451
                                    [nid] => 2244
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2244/ruf logo.SLDPRT
                                    [filename] => ruf logo.SLDPRT
                                    [format] => SLDPRT
                                    [size] => 374784
                                    [mainImage] => 0
                                    [date] => 2017-09-01 12:24:22
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 37
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 1.53 MB
                    [numDownloads] => 0
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [41] => stdClass Object
                (
                    [id] => 2243
                    [title] => Rolls Royce Logo
                    [software] => 
                    [version] => 
                    [description] => A Rolls Royce logo
                    [viewerfile] => rolls royce logo.IGS
                    [video] => 
                    [access] => 0
                    [added] => 2017-09-01 12:23:31
                    [updated] => 2017-09-01 12:23:31
                    [uid] => 5451
                    [tags] => rolls royce,logo,car
                    [classification] => 2
                    [permalink] => rolls-royce-logo
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 9857
                    [mainImage] => render1.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 9858
                                    [uid] => 5451
                                    [nid] => 2243
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2243/rolls royce logo.SLDPRT
                                    [filename] => rolls royce logo.SLDPRT
                                    [format] => SLDPRT
                                    [size] => 1626624
                                    [mainImage] => 0
                                    [date] => 2017-09-01 12:22:38
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 37
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 9857
                                    [uid] => 5451
                                    [nid] => 2243
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2243/rolls royce logo.IGS
                                    [filename] => rolls royce logo.IGS
                                    [format] => IGS
                                    [size] => 1132666
                                    [mainImage] => 0
                                    [date] => 2017-09-01 12:22:23
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 17
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 9856
                                    [uid] => 5451
                                    [nid] => 2243
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2243/render1.png
                                    [filename] => render1.png
                                    [format] => PNG
                                    [size] => 832883
                                    [mainImage] => 1
                                    [date] => 2017-09-01 12:22:18
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 3.43 MB
                    [numDownloads] => 0
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [42] => stdClass Object
                (
                    [id] => 2242
                    [title] => Renault Logo
                    [software] => 
                    [version] => 
                    [description] => A Renault logo
                    [viewerfile] => renault logo.IGS
                    [video] => 
                    [access] => 0
                    [added] => 2017-09-01 12:21:28
                    [updated] => 2017-09-01 12:21:28
                    [uid] => 5451
                    [tags] => renault,logo,car
                    [classification] => 2
                    [permalink] => renault-logo
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 9853
                    [mainImage] => render1.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 9855
                                    [uid] => 5451
                                    [nid] => 2242
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2242/render1.png
                                    [filename] => render1.png
                                    [format] => PNG
                                    [size] => 794758
                                    [mainImage] => 1
                                    [date] => 2017-09-01 12:20:34
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 9854
                                    [uid] => 5451
                                    [nid] => 2242
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2242/renault logo.SLDPRT
                                    [filename] => renault logo.SLDPRT
                                    [format] => SLDPRT
                                    [size] => 721920
                                    [mainImage] => 0
                                    [date] => 2017-09-01 12:20:33
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 37
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 9853
                                    [uid] => 5451
                                    [nid] => 2242
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2242/renault logo.IGS
                                    [filename] => renault logo.IGS
                                    [format] => IGS
                                    [size] => 243294
                                    [mainImage] => 0
                                    [date] => 2017-09-01 12:20:20
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 17
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 1.68 MB
                    [numDownloads] => 0
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [43] => stdClass Object
                (
                    [id] => 2241
                    [title] => Proton Logo
                    [software] => 
                    [version] => 
                    [description] => A Proton logo
                    [viewerfile] => proton logo.IGS
                    [video] => 
                    [access] => 0
                    [added] => 2017-09-01 12:19:41
                    [updated] => 2017-09-01 12:19:41
                    [uid] => 5451
                    [tags] => proton,logo,car
                    [classification] => 2
                    [permalink] => proton-logo
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 9851
                    [mainImage] => render1.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 9851
                                    [uid] => 5451
                                    [nid] => 2241
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2241/proton logo.IGS
                                    [filename] => proton logo.IGS
                                    [format] => IGS
                                    [size] => 2496244
                                    [mainImage] => 0
                                    [date] => 2017-09-01 12:18:49
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 17
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 9852
                                    [uid] => 5451
                                    [nid] => 2241
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2241/proton logo.SLDPRT
                                    [filename] => proton logo.SLDPRT
                                    [format] => SLDPRT
                                    [size] => 2380800
                                    [mainImage] => 0
                                    [date] => 2017-09-01 12:19:02
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 37
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 9850
                                    [uid] => 5451
                                    [nid] => 2241
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2241/render1.png
                                    [filename] => render1.png
                                    [format] => PNG
                                    [size] => 1028376
                                    [mainImage] => 1
                                    [date] => 2017-09-01 12:18:32
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 5.63 MB
                    [numDownloads] => 0
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [44] => stdClass Object
                (
                    [id] => 2240
                    [title] => Porsche Logo
                    [software] => 
                    [version] => 
                    [description] => A Porsche logo
                    [viewerfile] => porsche logo.IGS
                    [video] => 
                    [access] => 0
                    [added] => 2017-08-31 20:44:26
                    [updated] => 2017-08-31 20:44:26
                    [uid] => 5451
                    [tags] => porsche,car,logo
                    [classification] => 2
                    [permalink] => porsche-logo
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 9848
                    [mainImage] => render1.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 9849
                                    [uid] => 5451
                                    [nid] => 2240
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2240/porsche logo.SLDPRT
                                    [filename] => porsche logo.SLDPRT
                                    [format] => SLDPRT
                                    [size] => 15269376
                                    [mainImage] => 0
                                    [date] => 2017-08-31 20:44:18
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 37
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 9848
                                    [uid] => 5451
                                    [nid] => 2240
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2240/porsche logo.IGS
                                    [filename] => porsche logo.IGS
                                    [format] => IGS
                                    [size] => 6770740
                                    [mainImage] => 0
                                    [date] => 2017-08-31 20:43:27
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 17
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 9847
                                    [uid] => 5451
                                    [nid] => 2240
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2240/render1.png
                                    [filename] => render1.png
                                    [format] => PNG
                                    [size] => 1155363
                                    [mainImage] => 1
                                    [date] => 2017-08-31 20:41:10
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 22.12 MB
                    [numDownloads] => 0
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [45] => stdClass Object
                (
                    [id] => 2239
                    [title] => Pontiac Logo
                    [software] => 
                    [version] => 
                    [description] => A Pontiac logo
                    [viewerfile] => pontiac logo.IGS
                    [video] => 
                    [access] => 0
                    [added] => 2017-08-31 20:39:44
                    [updated] => 2017-08-31 20:39:44
                    [uid] => 5451
                    [tags] => pontiac,logo,car
                    [classification] => 2
                    [permalink] => pontiac-logo
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 9844
                    [mainImage] => render1.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 9846
                                    [uid] => 5451
                                    [nid] => 2239
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2239/render1.png
                                    [filename] => render1.png
                                    [format] => PNG
                                    [size] => 760639
                                    [mainImage] => 1
                                    [date] => 2017-08-31 20:38:49
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 9845
                                    [uid] => 5451
                                    [nid] => 2239
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2239/pontiac logo.SLDPRT
                                    [filename] => pontiac logo.SLDPRT
                                    [format] => SLDPRT
                                    [size] => 485888
                                    [mainImage] => 0
                                    [date] => 2017-08-31 20:38:45
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 37
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 9844
                                    [uid] => 5451
                                    [nid] => 2239
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2239/pontiac logo.IGS
                                    [filename] => pontiac logo.IGS
                                    [format] => IGS
                                    [size] => 269370
                                    [mainImage] => 0
                                    [date] => 2017-08-31 20:38:36
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 17
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 1.45 MB
                    [numDownloads] => 0
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [46] => stdClass Object
                (
                    [id] => 2238
                    [title] => Peugeot Logo
                    [software] => 
                    [version] => 
                    [description] => A Peugeot logo
                    [viewerfile] => peugeot logo.IGS
                    [video] => 
                    [access] => 0
                    [added] => 2017-08-31 20:37:46
                    [updated] => 2017-08-31 20:37:46
                    [uid] => 5451
                    [tags] => peugeot,logo,car
                    [classification] => 2
                    [permalink] => peugeot-logo
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 9842
                    [mainImage] => peugeot logo.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 9843
                                    [uid] => 5451
                                    [nid] => 2238
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2238/peugeot logo.SLDPRT
                                    [filename] => peugeot logo.SLDPRT
                                    [format] => SLDPRT
                                    [size] => 7607296
                                    [mainImage] => 0
                                    [date] => 2017-08-31 20:37:13
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 37
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 9842
                                    [uid] => 5451
                                    [nid] => 2238
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2238/peugeot logo.IGS
                                    [filename] => peugeot logo.IGS
                                    [format] => IGS
                                    [size] => 987280
                                    [mainImage] => 0
                                    [date] => 2017-08-31 20:36:04
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 17
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 9841
                                    [uid] => 5451
                                    [nid] => 2238
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2238/peugeot logo.png
                                    [filename] => peugeot logo.png
                                    [format] => PNG
                                    [size] => 874023
                                    [mainImage] => 1
                                    [date] => 2017-08-31 20:35:54
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 9.03 MB
                    [numDownloads] => 0
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [47] => stdClass Object
                (
                    [id] => 2237
                    [title] => Pagani Logo
                    [software] => 
                    [version] => 
                    [description] => A Pagani logo
                    [viewerfile] => pagani logo.IGS
                    [video] => 
                    [access] => 0
                    [added] => 2017-08-31 20:34:54
                    [updated] => 2017-08-31 20:34:54
                    [uid] => 5451
                    [tags] => pagani,logo,car
                    [classification] => 2
                    [permalink] => pagani-logo
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 9840
                    [mainImage] => render1.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 9840
                                    [uid] => 5451
                                    [nid] => 2237
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2237/pagani logo.IGS
                                    [filename] => pagani logo.IGS
                                    [format] => IGS
                                    [size] => 5263580
                                    [mainImage] => 0
                                    [date] => 2017-08-31 20:34:26
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 17
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 9839
                                    [uid] => 5451
                                    [nid] => 2237
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2237/pagani logo.SLDPRT
                                    [filename] => pagani logo.SLDPRT
                                    [format] => SLDPRT
                                    [size] => 2820608
                                    [mainImage] => 0
                                    [date] => 2017-08-31 20:34:03
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 37
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 9838
                                    [uid] => 5451
                                    [nid] => 2237
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2237/render1.png
                                    [filename] => render1.png
                                    [format] => PNG
                                    [size] => 887152
                                    [mainImage] => 1
                                    [date] => 2017-08-31 20:33:25
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 8.56 MB
                    [numDownloads] => 0
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [48] => stdClass Object
                (
                    [id] => 2236
                    [title] => Opel Logo
                    [software] => 
                    [version] => 
                    [description] => An Opel logo
                    [viewerfile] => opel logo.IGS
                    [video] => 
                    [access] => 0
                    [added] => 2017-08-31 20:31:56
                    [updated] => 2017-08-31 20:31:56
                    [uid] => 5451
                    [tags] => opel,logo,car
                    [classification] => 2
                    [permalink] => opel-logo
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 9835
                    [mainImage] => render1.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 9837
                                    [uid] => 5451
                                    [nid] => 2236
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2236/opel logo.SLDPRT
                                    [filename] => opel logo.SLDPRT
                                    [format] => SLDPRT
                                    [size] => 2309632
                                    [mainImage] => 0
                                    [date] => 2017-08-31 20:31:41
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 37
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 9836
                                    [uid] => 5451
                                    [nid] => 2236
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2236/render1.png
                                    [filename] => render1.png
                                    [format] => PNG
                                    [size] => 865928
                                    [mainImage] => 1
                                    [date] => 2017-08-31 20:31:26
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 9835
                                    [uid] => 5451
                                    [nid] => 2236
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2236/opel logo.IGS
                                    [filename] => opel logo.IGS
                                    [format] => IGS
                                    [size] => 404424
                                    [mainImage] => 0
                                    [date] => 2017-08-31 20:31:13
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 17
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 3.41 MB
                    [numDownloads] => 0
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [49] => stdClass Object
                (
                    [id] => 2235
                    [title] => Nissan Logo
                    [software] => 
                    [version] => 
                    [description] => A Nissan logo
                    [viewerfile] => nissan logo.IGS
                    [video] => 
                    [access] => 0
                    [added] => 2017-08-31 20:30:14
                    [updated] => 2017-08-31 20:30:14
                    [uid] => 5451
                    [tags] => nissan,logo,car
                    [classification] => 2
                    [permalink] => nissan-logo
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 9833
                    [mainImage] => render1.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 9833
                                    [uid] => 5451
                                    [nid] => 2235
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2235/nissan logo.IGS
                                    [filename] => nissan logo.IGS
                                    [format] => IGS
                                    [size] => 1928968
                                    [mainImage] => 0
                                    [date] => 2017-08-31 20:29:30
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 17
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 9832
                                    [uid] => 5451
                                    [nid] => 2235
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2235/nissan logo.SLDPRT
                                    [filename] => nissan logo.SLDPRT
                                    [format] => SLDPRT
                                    [size] => 1422848
                                    [mainImage] => 0
                                    [date] => 2017-08-31 20:29:27
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 37
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 9834
                                    [uid] => 5451
                                    [nid] => 2235
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2235/render1.png
                                    [filename] => render1.png
                                    [format] => PNG
                                    [size] => 897667
                                    [mainImage] => 1
                                    [date] => 2017-08-31 20:29:36
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 4.05 MB
                    [numDownloads] => 0
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [50] => stdClass Object
                (
                    [id] => 2234
                    [title] => Morgan Logo
                    [software] => 
                    [version] => 
                    [description] => A Morgan logo
                    [viewerfile] => morgan logo.IGS
                    [video] => 
                    [access] => 0
                    [added] => 2017-08-31 20:28:11
                    [updated] => 2017-08-31 20:28:11
                    [uid] => 5451
                    [tags] => morgan,logo,car
                    [classification] => 2
                    [permalink] => morgan-logo
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 9830
                    [mainImage] => render1.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 9830
                                    [uid] => 5451
                                    [nid] => 2234
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2234/morgan logo.IGS
                                    [filename] => morgan logo.IGS
                                    [format] => IGS
                                    [size] => 2863030
                                    [mainImage] => 0
                                    [date] => 2017-08-31 20:27:24
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 17
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 9831
                                    [uid] => 5451
                                    [nid] => 2234
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2234/morgan logo.SLDPRT
                                    [filename] => morgan logo.SLDPRT
                                    [format] => SLDPRT
                                    [size] => 2578432
                                    [mainImage] => 0
                                    [date] => 2017-08-31 20:27:30
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 37
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 9829
                                    [uid] => 5451
                                    [nid] => 2234
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2234/render1.png
                                    [filename] => render1.png
                                    [format] => PNG
                                    [size] => 769749
                                    [mainImage] => 1
                                    [date] => 2017-08-31 20:26:53
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 5.92 MB
                    [numDownloads] => 0
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [51] => stdClass Object
                (
                    [id] => 2233
                    [title] => Mitsubishi Logo
                    [software] => 
                    [version] => 
                    [description] => A Mitsubishi logo
                    [viewerfile] => mitsubishi logo.IGS
                    [video] => 
                    [access] => 0
                    [added] => 2017-08-31 20:25:30
                    [updated] => 2017-08-31 20:25:30
                    [uid] => 5451
                    [tags] => mitsubishi,logo,car
                    [classification] => 2
                    [permalink] => mitsubishi-logo
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 9826
                    [mainImage] => render1.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 9828
                                    [uid] => 5451
                                    [nid] => 2233
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2233/mitsubishi logo.SLDPRT
                                    [filename] => mitsubishi logo.SLDPRT
                                    [format] => SLDPRT
                                    [size] => 2458112
                                    [mainImage] => 0
                                    [date] => 2017-08-31 20:24:38
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 37
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 9827
                                    [uid] => 5451
                                    [nid] => 2233
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2233/render1.png
                                    [filename] => render1.png
                                    [format] => PNG
                                    [size] => 776465
                                    [mainImage] => 1
                                    [date] => 2017-08-31 20:24:18
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 9826
                                    [uid] => 5451
                                    [nid] => 2233
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2233/mitsubishi logo.IGS
                                    [filename] => mitsubishi logo.IGS
                                    [format] => IGS
                                    [size] => 68552
                                    [mainImage] => 0
                                    [date] => 2017-08-31 20:24:01
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 17
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 3.15 MB
                    [numDownloads] => 0
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [52] => stdClass Object
                (
                    [id] => 2232
                    [title] => Mini Logo
                    [software] => 
                    [version] => 
                    [description] => A Mini logo
                    [viewerfile] => mini logo.IGS
                    [video] => 
                    [access] => 0
                    [added] => 2017-08-31 20:21:47
                    [updated] => 2017-08-31 20:21:47
                    [uid] => 5451
                    [tags] => mini,logo,car
                    [classification] => 2
                    [permalink] => mini-logo
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 9823
                    [mainImage] => render1.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 9824
                                    [uid] => 5451
                                    [nid] => 2232
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2232/mini logo.SLDPRT
                                    [filename] => mini logo.SLDPRT
                                    [format] => SLDPRT
                                    [size] => 1457152
                                    [mainImage] => 0
                                    [date] => 2017-08-31 20:20:47
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 37
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 9823
                                    [uid] => 5451
                                    [nid] => 2232
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2232/mini logo.IGS
                                    [filename] => mini logo.IGS
                                    [format] => IGS
                                    [size] => 1112986
                                    [mainImage] => 0
                                    [date] => 2017-08-31 20:20:39
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 17
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 9825
                                    [uid] => 5451
                                    [nid] => 2232
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2232/render1.png
                                    [filename] => render1.png
                                    [format] => PNG
                                    [size] => 949642
                                    [mainImage] => 1
                                    [date] => 2017-08-31 20:20:49
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 3.36 MB
                    [numDownloads] => 0
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [53] => stdClass Object
                (
                    [id] => 2231
                    [title] => Mercury Logo
                    [software] => 
                    [version] => 
                    [description] => A Mercury Logo
                    [viewerfile] => mercury logo.IGS
                    [video] => 
                    [access] => 0
                    [added] => 2017-08-31 20:19:39
                    [updated] => 2017-08-31 20:19:39
                    [uid] => 5451
                    [tags] => mercury,logo,car
                    [classification] => 2
                    [permalink] => mercury-logo
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 9821
                    [mainImage] => render1.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 9822
                                    [uid] => 5451
                                    [nid] => 2231
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2231/render1.png
                                    [filename] => render1.png
                                    [format] => PNG
                                    [size] => 900907
                                    [mainImage] => 1
                                    [date] => 2017-08-31 20:19:02
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 9821
                                    [uid] => 5451
                                    [nid] => 2231
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2231/mercury logo.IGS
                                    [filename] => mercury logo.IGS
                                    [format] => IGS
                                    [size] => 651572
                                    [mainImage] => 0
                                    [date] => 2017-08-31 20:18:54
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 17
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 9820
                                    [uid] => 5451
                                    [nid] => 2231
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2231/mercury logo.SLDPRT
                                    [filename] => mercury logo.SLDPRT
                                    [format] => SLDPRT
                                    [size] => 537600
                                    [mainImage] => 0
                                    [date] => 2017-08-31 20:18:53
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 37
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 1.99 MB
                    [numDownloads] => 0
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [54] => stdClass Object
                (
                    [id] => 2230
                    [title] => Mercedes Benz Logo
                    [software] => 
                    [version] => 
                    [description] => A Mercedes Benz logo
                    [viewerfile] => mercedes benz logo.IGS
                    [video] => 
                    [access] => 0
                    [added] => 2017-08-31 20:18:06
                    [updated] => 2017-08-31 20:18:06
                    [uid] => 5451
                    [tags] => mercedes,benz,logo,car
                    [classification] => 2
                    [permalink] => mercedes-benz-logo
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 9817
                    [mainImage] => render1.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 9819
                                    [uid] => 5451
                                    [nid] => 2230
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2230/mercedes benz logo.SLDPRT
                                    [filename] => mercedes benz logo.SLDPRT
                                    [format] => SLDPRT
                                    [size] => 1775616
                                    [mainImage] => 0
                                    [date] => 2017-08-31 20:16:49
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 37
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 9818
                                    [uid] => 5451
                                    [nid] => 2230
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2230/render1.png
                                    [filename] => render1.png
                                    [format] => PNG
                                    [size] => 1013552
                                    [mainImage] => 1
                                    [date] => 2017-08-31 20:16:42
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 9817
                                    [uid] => 5451
                                    [nid] => 2230
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2230/mercedes benz logo.IGS
                                    [filename] => mercedes benz logo.IGS
                                    [format] => IGS
                                    [size] => 176628
                                    [mainImage] => 0
                                    [date] => 2017-08-31 20:16:24
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 17
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 2.83 MB
                    [numDownloads] => 0
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [55] => stdClass Object
                (
                    [id] => 2229
                    [title] => McLaren Logo
                    [software] => 
                    [version] => 
                    [description] => A McLaren logo
                    [viewerfile] => mclaren logo.IGS
                    [video] => 
                    [access] => 0
                    [added] => 2017-08-31 20:15:46
                    [updated] => 2017-08-31 20:15:46
                    [uid] => 5451
                    [tags] => mclaren,logo,car
                    [classification] => 2
                    [permalink] => mclaren-logo-2
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 9816
                    [mainImage] => render1.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 9816
                                    [uid] => 5451
                                    [nid] => 2229
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2229/mclaren logo.IGS
                                    [filename] => mclaren logo.IGS
                                    [format] => IGS
                                    [size] => 1054110
                                    [mainImage] => 0
                                    [date] => 2017-08-31 20:14:03
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 17
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 9815
                                    [uid] => 5451
                                    [nid] => 2229
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2229/mclaren logo.SLDPRT
                                    [filename] => mclaren logo.SLDPRT
                                    [format] => SLDPRT
                                    [size] => 999936
                                    [mainImage] => 0
                                    [date] => 2017-08-31 20:13:58
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 37
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 9814
                                    [uid] => 5451
                                    [nid] => 2229
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2229/render1.png
                                    [filename] => render1.png
                                    [format] => PNG
                                    [size] => 748085
                                    [mainImage] => 1
                                    [date] => 2017-08-31 20:13:57
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 2.67 MB
                    [numDownloads] => 0
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [56] => stdClass Object
                (
                    [id] => 2227
                    [title] => Maserati Logo
                    [software] => 
                    [version] => 
                    [description] => A Maserati logo
                    [viewerfile] => maserati logo.IGS
                    [video] => 
                    [access] => 0
                    [added] => 2017-08-31 20:13:04
                    [updated] => 2017-08-31 20:13:04
                    [uid] => 5451
                    [tags] => maserati,logo,car
                    [classification] => 2
                    [permalink] => maserati-logo
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 9811
                    [mainImage] => render1.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 9812
                                    [uid] => 5451
                                    [nid] => 2227
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2227/maserati logo.SLDPRT
                                    [filename] => maserati logo.SLDPRT
                                    [format] => SLDPRT
                                    [size] => 1210368
                                    [mainImage] => 0
                                    [date] => 2017-08-31 20:12:05
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 37
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 9811
                                    [uid] => 5451
                                    [nid] => 2227
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2227/maserati logo.IGS
                                    [filename] => maserati logo.IGS
                                    [format] => IGS
                                    [size] => 1033200
                                    [mainImage] => 0
                                    [date] => 2017-08-31 20:12:02
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 17
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 9813
                                    [uid] => 5451
                                    [nid] => 2227
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2227/render1.png
                                    [filename] => render1.png
                                    [format] => PNG
                                    [size] => 885551
                                    [mainImage] => 1
                                    [date] => 2017-08-31 20:12:12
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 2.98 MB
                    [numDownloads] => 0
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [57] => stdClass Object
                (
                    [id] => 2226
                    [title] => Marussia Logo
                    [software] => 
                    [version] => 
                    [description] => A Marussia logo
                    [viewerfile] => marussia logo.IGS
                    [video] => 
                    [access] => 0
                    [added] => 2017-08-31 20:10:45
                    [updated] => 2017-08-31 20:10:45
                    [uid] => 5451
                    [tags] => marussia,logo,car
                    [classification] => 2
                    [permalink] => marussia-logo
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 9808
                    [mainImage] => render1.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 9810
                                    [uid] => 5451
                                    [nid] => 2226
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2226/marussia logo.SLDPRT
                                    [filename] => marussia logo.SLDPRT
                                    [format] => SLDPRT
                                    [size] => 4266496
                                    [mainImage] => 0
                                    [date] => 2017-08-31 20:09:28
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 37
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 9808
                                    [uid] => 5451
                                    [nid] => 2226
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2226/marussia logo.IGS
                                    [filename] => marussia logo.IGS
                                    [format] => IGS
                                    [size] => 1402200
                                    [mainImage] => 0
                                    [date] => 2017-08-31 20:08:42
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 17
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 9809
                                    [uid] => 5451
                                    [nid] => 2226
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2226/render1.png
                                    [filename] => render1.png
                                    [format] => PNG
                                    [size] => 1022128
                                    [mainImage] => 1
                                    [date] => 2017-08-31 20:08:57
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 6.38 MB
                    [numDownloads] => 0
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [58] => stdClass Object
                (
                    [id] => 2225
                    [title] => Lotus Logo
                    [software] => 
                    [version] => 
                    [description] => A Lotus logo
                    [viewerfile] => lotus logo.IGS
                    [video] => 
                    [access] => 0
                    [added] => 2017-08-31 20:07:42
                    [updated] => 2017-08-31 20:07:42
                    [uid] => 5451
                    [tags] => lotus,car,logo
                    [classification] => 2
                    [permalink] => lotus-logo
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 9806
                    [mainImage] => render1.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 9806
                                    [uid] => 5451
                                    [nid] => 2225
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2225/lotus logo.IGS
                                    [filename] => lotus logo.IGS
                                    [format] => IGS
                                    [size] => 953414
                                    [mainImage] => 0
                                    [date] => 2017-08-31 20:06:19
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 17
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 9807
                                    [uid] => 5451
                                    [nid] => 2225
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2225/render1.png
                                    [filename] => render1.png
                                    [format] => PNG
                                    [size] => 904360
                                    [mainImage] => 1
                                    [date] => 2017-08-31 20:06:27
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 9805
                                    [uid] => 5451
                                    [nid] => 2225
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2225/lotus logo.SLDPRT
                                    [filename] => lotus logo.SLDPRT
                                    [format] => SLDPRT
                                    [size] => 819200
                                    [mainImage] => 0
                                    [date] => 2017-08-31 20:06:18
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 37
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 2.55 MB
                    [numDownloads] => 0
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [59] => stdClass Object
                (
                    [id] => 2224
                    [title] => Lister Logo
                    [software] => 
                    [version] => 
                    [description] => A Lister logo
                    [viewerfile] => lister logo.IGS
                    [video] => 
                    [access] => 0
                    [added] => 2017-08-31 20:05:22
                    [updated] => 2017-08-31 20:05:22
                    [uid] => 5451
                    [tags] => lister,logo,car
                    [classification] => 2
                    [permalink] => lister-logo
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 9802
                    [mainImage] => render1.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 9804
                                    [uid] => 5451
                                    [nid] => 2224
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2224/lister logo.SLDPRT
                                    [filename] => lister logo.SLDPRT
                                    [format] => SLDPRT
                                    [size] => 2835968
                                    [mainImage] => 0
                                    [date] => 2017-08-31 20:04:11
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 37
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 9802
                                    [uid] => 5451
                                    [nid] => 2224
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2224/lister logo.IGS
                                    [filename] => lister logo.IGS
                                    [format] => IGS
                                    [size] => 1031314
                                    [mainImage] => 0
                                    [date] => 2017-08-31 20:03:36
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 17
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 9803
                                    [uid] => 5451
                                    [nid] => 2224
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2224/render1.png
                                    [filename] => render1.png
                                    [format] => PNG
                                    [size] => 878803
                                    [mainImage] => 1
                                    [date] => 2017-08-31 20:03:51
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 4.53 MB
                    [numDownloads] => 0
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [60] => stdClass Object
                (
                    [id] => 2223
                    [title] => Lincoln Logo
                    [software] => 
                    [version] => 
                    [description] => A Lincoln logo
                    [viewerfile] => lincoln logo.IGS
                    [video] => 
                    [access] => 0
                    [added] => 2017-08-31 20:01:50
                    [updated] => 2017-08-31 20:01:50
                    [uid] => 5451
                    [tags] => lincoln,logo,car
                    [classification] => 2
                    [permalink] => lincoln-logo
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 9799
                    [mainImage] => render1.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 9801
                                    [uid] => 5451
                                    [nid] => 2223
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2223/render1.png
                                    [filename] => render1.png
                                    [format] => PNG
                                    [size] => 775635
                                    [mainImage] => 1
                                    [date] => 2017-08-31 20:00:52
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 9800
                                    [uid] => 5451
                                    [nid] => 2223
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2223/lincoln logo.SLDPRT
                                    [filename] => lincoln logo.SLDPRT
                                    [format] => SLDPRT
                                    [size] => 685056
                                    [mainImage] => 0
                                    [date] => 2017-08-31 20:00:51
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 37
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 9799
                                    [uid] => 5451
                                    [nid] => 2223
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2223/lincoln logo.IGS
                                    [filename] => lincoln logo.IGS
                                    [format] => IGS
                                    [size] => 651080
                                    [mainImage] => 0
                                    [date] => 2017-08-31 20:00:49
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 17
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 2.01 MB
                    [numDownloads] => 0
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [61] => stdClass Object
                (
                    [id] => 2222
                    [title] => Lexus Logo
                    [software] => 
                    [version] => 
                    [description] => A Lexus logo
                    [viewerfile] => lexus logo.IGS
                    [video] => 
                    [access] => 0
                    [added] => 2017-08-31 19:59:39
                    [updated] => 2017-08-31 19:59:39
                    [uid] => 5451
                    [tags] => lexus,logo,car
                    [classification] => 2
                    [permalink] => lexus-logo
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 9796
                    [mainImage] => render1.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 9797
                                    [uid] => 5451
                                    [nid] => 2222
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2222/lexus logo.SLDPRT
                                    [filename] => lexus logo.SLDPRT
                                    [format] => SLDPRT
                                    [size] => 1315328
                                    [mainImage] => 0
                                    [date] => 2017-08-31 19:58:50
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 37
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 9798
                                    [uid] => 5451
                                    [nid] => 2222
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2222/render1.png
                                    [filename] => render1.png
                                    [format] => PNG
                                    [size] => 1020076
                                    [mainImage] => 1
                                    [date] => 2017-08-31 19:58:58
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 9796
                                    [uid] => 5451
                                    [nid] => 2222
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2222/lexus logo.IGS
                                    [filename] => lexus logo.IGS
                                    [format] => IGS
                                    [size] => 476748
                                    [mainImage] => 0
                                    [date] => 2017-08-31 19:58:37
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 17
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 2.68 MB
                    [numDownloads] => 0
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [62] => stdClass Object
                (
                    [id] => 2221
                    [title] => Land Rover Logo
                    [software] => 
                    [version] => 
                    [description] => A Land Rover logo
                    [viewerfile] => land rover logo.IGS
                    [video] => 
                    [access] => 0
                    [added] => 2017-08-31 19:57:50
                    [updated] => 2017-08-31 19:57:50
                    [uid] => 5451
                    [tags] => land rover,logo,car
                    [classification] => 2
                    [permalink] => land-rover-logo
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 9794
                    [mainImage] => render1.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 9795
                                    [uid] => 5451
                                    [nid] => 2221
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2221/land rover logo.SLDPRT
                                    [filename] => land rover logo.SLDPRT
                                    [format] => SLDPRT
                                    [size] => 7218688
                                    [mainImage] => 0
                                    [date] => 2017-08-31 19:57:24
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 37
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 9794
                                    [uid] => 5451
                                    [nid] => 2221
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2221/land rover logo.IGS
                                    [filename] => land rover logo.IGS
                                    [format] => IGS
                                    [size] => 2824654
                                    [mainImage] => 0
                                    [date] => 2017-08-31 19:56:52
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 17
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 9793
                                    [uid] => 5451
                                    [nid] => 2221
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2221/render1.png
                                    [filename] => render1.png
                                    [format] => PNG
                                    [size] => 848896
                                    [mainImage] => 1
                                    [date] => 2017-08-31 19:56:03
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 10.39 MB
                    [numDownloads] => 0
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [63] => stdClass Object
                (
                    [id] => 2220
                    [title] => Lancia Logo
                    [software] => 
                    [version] => 
                    [description] => A Lancia logo
                    [viewerfile] => lancia logo.IGS
                    [video] => 
                    [access] => 0
                    [added] => 2017-08-31 19:54:45
                    [updated] => 2017-08-31 19:54:45
                    [uid] => 5451
                    [tags] => lancia,logo,car
                    [classification] => 2
                    [permalink] => lancia-logo
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 9790
                    [mainImage] => render1.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 9792
                                    [uid] => 5451
                                    [nid] => 2220
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2220/lancia logo.SLDPRT
                                    [filename] => lancia logo.SLDPRT
                                    [format] => SLDPRT
                                    [size] => 2008064
                                    [mainImage] => 0
                                    [date] => 2017-08-31 19:53:34
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 37
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 9791
                                    [uid] => 5451
                                    [nid] => 2220
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2220/render1.png
                                    [filename] => render1.png
                                    [format] => PNG
                                    [size] => 1046680
                                    [mainImage] => 1
                                    [date] => 2017-08-31 19:53:27
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 9790
                                    [uid] => 5451
                                    [nid] => 2220
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2220/lancia logo.IGS
                                    [filename] => lancia logo.IGS
                                    [format] => IGS
                                    [size] => 980146
                                    [mainImage] => 0
                                    [date] => 2017-08-31 19:53:08
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 17
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 3.85 MB
                    [numDownloads] => 0
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [64] => stdClass Object
                (
                    [id] => 2219
                    [title] => Lagonda Logo
                    [software] => 
                    [version] => 
                    [description] => A Lagonda logo
                    [viewerfile] => lagonda logo.IGS
                    [video] => 
                    [access] => 0
                    [added] => 2017-08-31 19:52:11
                    [updated] => 2017-08-31 19:52:11
                    [uid] => 5451
                    [tags] => lagonda,logo,car
                    [classification] => 2
                    [permalink] => lagonda-logo
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 9788
                    [mainImage] => render1.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 9788
                                    [uid] => 5451
                                    [nid] => 2219
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2219/lagonda logo.IGS
                                    [filename] => lagonda logo.IGS
                                    [format] => IGS
                                    [size] => 7784752
                                    [mainImage] => 0
                                    [date] => 2017-08-31 19:51:34
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 17
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 9789
                                    [uid] => 5451
                                    [nid] => 2219
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2219/lagonda logo.SLDPRT
                                    [filename] => lagonda logo.SLDPRT
                                    [format] => SLDPRT
                                    [size] => 5357056
                                    [mainImage] => 0
                                    [date] => 2017-08-31 19:51:55
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 37
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 9787
                                    [uid] => 5451
                                    [nid] => 2219
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2219/render1.png
                                    [filename] => render1.png
                                    [format] => PNG
                                    [size] => 1024413
                                    [mainImage] => 1
                                    [date] => 2017-08-31 19:50:36
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 13.51 MB
                    [numDownloads] => 0
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [65] => stdClass Object
                (
                    [id] => 2218
                    [title] => Koenigsegg Logo
                    [software] => 
                    [version] => 
                    [description] => A Koenigsegg logo
                    [viewerfile] => koenigsegg logo.IGS
                    [video] => 
                    [access] => 0
                    [added] => 2017-08-31 19:48:59
                    [updated] => 2017-08-31 19:48:59
                    [uid] => 5451
                    [tags] => koenigsegg, logo,car
                    [classification] => 2
                    [permalink] => koenigsegg-logo
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 9785
                    [mainImage] => render1.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 9786
                                    [uid] => 5451
                                    [nid] => 2218
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2218/koenigsegg logo.SLDPRT
                                    [filename] => koenigsegg logo.SLDPRT
                                    [format] => SLDPRT
                                    [size] => 9732608
                                    [mainImage] => 0
                                    [date] => 2017-08-31 19:48:09
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 37
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 9785
                                    [uid] => 5451
                                    [nid] => 2218
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2218/koenigsegg logo.IGS
                                    [filename] => koenigsegg logo.IGS
                                    [format] => IGS
                                    [size] => 2907228
                                    [mainImage] => 0
                                    [date] => 2017-08-31 19:47:01
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 17
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 9784
                                    [uid] => 5451
                                    [nid] => 2218
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2218/render1.png
                                    [filename] => render1.png
                                    [format] => PNG
                                    [size] => 985135
                                    [mainImage] => 1
                                    [date] => 2017-08-31 19:46:32
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 12.99 MB
                    [numDownloads] => 0
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [66] => stdClass Object
                (
                    [id] => 2217
                    [title] => Kia Logo
                    [software] => 
                    [version] => 
                    [description] => A Kia logo
                    [viewerfile] => kia logo.IGS
                    [video] => 
                    [access] => 0
                    [added] => 2017-08-31 19:45:28
                    [updated] => 2017-08-31 19:45:28
                    [uid] => 5451
                    [tags] => kia,logo,car
                    [classification] => 2
                    [permalink] => kia-logo
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 9783
                    [mainImage] => render1.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 9783
                                    [uid] => 5451
                                    [nid] => 2217
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2217/kia logo.IGS
                                    [filename] => kia logo.IGS
                                    [format] => IGS
                                    [size] => 1393016
                                    [mainImage] => 0
                                    [date] => 2017-08-31 19:44:43
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 17
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 9782
                                    [uid] => 5451
                                    [nid] => 2217
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2217/render1.png
                                    [filename] => render1.png
                                    [format] => PNG
                                    [size] => 773401
                                    [mainImage] => 1
                                    [date] => 2017-08-31 19:44:38
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 9781
                                    [uid] => 5451
                                    [nid] => 2217
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2217/kia logo.SLDPRT
                                    [filename] => kia logo.SLDPRT
                                    [format] => SLDPRT
                                    [size] => 740352
                                    [mainImage] => 0
                                    [date] => 2017-08-31 19:44:38
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 37
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 2.77 MB
                    [numDownloads] => 0
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [67] => stdClass Object
                (
                    [id] => 2216
                    [title] => Jeep Logo
                    [software] => 
                    [version] => 
                    [description] => A Jeep logo
                    [viewerfile] => jeep logo.IGS
                    [video] => 
                    [access] => 0
                    [added] => 2017-08-31 19:43:30
                    [updated] => 2017-08-31 19:43:30
                    [uid] => 5451
                    [tags] => jeep,logo,car
                    [classification] => 2
                    [permalink] => jeep-logo
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 9778
                    [mainImage] => render1.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 9780
                                    [uid] => 5451
                                    [nid] => 2216
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2216/jeep logo.SLDPRT
                                    [filename] => jeep logo.SLDPRT
                                    [format] => SLDPRT
                                    [size] => 2279936
                                    [mainImage] => 0
                                    [date] => 2017-08-31 19:42:49
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 37
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 9779
                                    [uid] => 5451
                                    [nid] => 2216
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2216/render1.png
                                    [filename] => render1.png
                                    [format] => PNG
                                    [size] => 799045
                                    [mainImage] => 1
                                    [date] => 2017-08-31 19:42:34
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 9778
                                    [uid] => 5451
                                    [nid] => 2216
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2216/jeep logo.IGS
                                    [filename] => jeep logo.IGS
                                    [format] => IGS
                                    [size] => 274290
                                    [mainImage] => 0
                                    [date] => 2017-08-31 19:42:21
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 17
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 3.2 MB
                    [numDownloads] => 0
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [68] => stdClass Object
                (
                    [id] => 2215
                    [title] => Jaguar Logo
                    [software] => 
                    [version] => 
                    [description] => A Juguar logo
                    [viewerfile] => jaguar logo.x_t
                    [video] => 
                    [access] => 0
                    [added] => 2017-08-31 19:41:33
                    [updated] => 2017-08-31 19:41:33
                    [uid] => 5451
                    [tags] => jaguar,car,logo
                    [classification] => 2
                    [permalink] => jaguar-logo
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 9775
                    [mainImage] => render1.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 9777
                                    [uid] => 5451
                                    [nid] => 2215
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2215/jaguar logo.SLDPRT
                                    [filename] => jaguar logo.SLDPRT
                                    [format] => SLDPRT
                                    [size] => 3415040
                                    [mainImage] => 0
                                    [date] => 2017-08-31 19:40:54
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 37
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 9776
                                    [uid] => 5451
                                    [nid] => 2215
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2215/render1.png
                                    [filename] => render1.png
                                    [format] => PNG
                                    [size] => 939223
                                    [mainImage] => 1
                                    [date] => 2017-08-31 19:40:30
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 9775
                                    [uid] => 5451
                                    [nid] => 2215
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2215/jaguar logo.x_t
                                    [filename] => jaguar logo.x_t
                                    [format] => X_T
                                    [size] => 656162
                                    [mainImage] => 0
                                    [date] => 2017-08-31 19:40:23
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 49
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 4.78 MB
                    [numDownloads] => 0
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [69] => stdClass Object
                (
                    [id] => 2214
                    [title] => Isuzu Logo
                    [software] => 
                    [version] => 
                    [description] => An Isuzu logo
                    [viewerfile] => isuzu logo.IGS
                    [video] => 
                    [access] => 0
                    [added] => 2017-08-31 19:38:46
                    [updated] => 2017-08-31 19:38:46
                    [uid] => 5451
                    [tags] => isuzu,logo,car
                    [classification] => 2
                    [permalink] => isuzu-logo
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Weldments
                                            [number] => License C-MR93VXJDD6
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:46
                                            [updated] => 2015-01-10 19:56:46
                                        )

                                    [6] => stdClass Object
                                        (
                                            [id] => 303
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Simulation
                                            [number] => License C-PP42LSNA3X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:57:08
                                            [updated] => 2015-01-10 19:57:08
                                        )

                                )

                            [notifysubscribe] => Array
                                (
                                    [id] => 3987
                                    [uid] => 5451
                                    [friend_request] => 0
                                    [receive_message] => 0
                                    [model_3d_view] => 0
                                    [model_comment] => 0
                                    [model_request] => 0
                                    [group_invite] => 0
                                    [group_post] => 0
                                    [group_post_comment] => 0
                                    [model_upload_friend] => 0
                                    [model_upload_follow] => 0
                                    [3dx_mktg_comm] => 1
                                    [3dx_member_updates] => 0
                                    [3dx_member_news] => 0
                                    [3dx_supplier_comm] => 0
                                    [updated] => 2017-03-29 16:37:42
                                )

                        )

                    [viewerFileId] => 9772
                    [mainImage] => render1.png
                    [showViewer] => 1
                    [model3dLink] => 
                    [modelFiles] => Array
                        (
                            [0] => stdClass Object
                                (
                                    [id] => 9774
                                    [uid] => 5451
                                    [nid] => 2214
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2214/render1.png
                                    [filename] => render1.png
                                    [format] => PNG
                                    [size] => 1019130
                                    [mainImage] => 1
                                    [date] => 2017-08-31 19:25:16
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 
                                    [is_image] => 1
                                    [numDownloads] => 0
                                )

                            [1] => stdClass Object
                                (
                                    [id] => 9772
                                    [uid] => 5451
                                    [nid] => 2214
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2214/isuzu logo.IGS
                                    [filename] => isuzu logo.IGS
                                    [format] => IGS
                                    [size] => 727340
                                    [mainImage] => 0
                                    [date] => 2017-08-31 19:25:11
                                    [is_3D] => 1
                                    [version] => 
                                    [software] => 17
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                            [2] => stdClass Object
                                (
                                    [id] => 9773
                                    [uid] => 5451
                                    [nid] => 2214
                                    [aid] => 0
                                    [filepath] => /var/www/html/content/files/models/2214/isuzu logo.SLDPRT
                                    [filename] => isuzu logo.SLDPRT
                                    [format] => SLDPRT
                                    [size] => 701440
                                    [mainImage] => 0
                                    [date] => 2017-08-31 19:25:12
                                    [is_3D] => 0
                                    [version] => 
                                    [software] => 37
                                    [is_image] => 
                                    [numDownloads] => 0
                                )

                        )

                    [size] => 2.33 MB
                    [numDownloads] => 0
                    [numLikes] => 0
                    [numComments] => 0
                    [winner] => 
                )

            [70] => stdClass Object
                (
                    [id] => 2213
                    [title] => Infiniti Logo
                    [software] => 
                    [version] => 
                    [description] => An Infiniti logo
                    [viewerfile] => infiniti logo.IGS
                    [video] => 
                    [access] => 0
                    [added] => 2017-08-31 19:24:04
                    [updated] => 2017-08-31 19:24:04
                    [uid] => 5451
                    [tags] => infiniti,logo,car
                    [classification] => 2
                    [permalink] => infiniti-logo
                    [status] => 1
                    [user] => stdClass Object
                        (
                            [uid] => 5451
                            [name] => Winston Jennings
                            [pass] => 93e2d5e1c9cfb308f568a17f60dddf6c
                            [email] => sendreplies@yahoo.com
                            [admin] => 0
                            [staff] => 0
                            [volunteer] => 0
                            [created] => 2015-01-10 19:46:14
                            [access] => 2017-02-28 09:55:40
                            [login] => 2017-12-10 00:16:58
                            [status] => 1
                            [timezone] => 
                            [language] => en-us
                            [hash] => 
                            [validated_hash] => f33b3037e3dc5afe0f79a31bcd08b80c
                            [picture] => 5451.jpg
                            [init_email] => sendreplies@yahoo.com
                            [first_name] => Winston
                            [last_name] => Jennings
                            [country] => JM
                            [region] => 01
                            [city] => Kingston
                            [zipcode] => 876
                            [privacy] => 1
                            [job_function] => Engineering, Design
                            [industry] => Engineering/Tech Design Services
                            [skills] => I like to design the world around me and make improvements where I see fit. The challenge is in the compromise of the engineered design!
                            [software] => a:14:{i:0;s:0:"";i:1;s:7:"AutoCAD";i:2;s:17:"Autodesk Inventor";i:3;s:14:"Autodesk Revit";i:4;s:5:"CATIA";i:5;s:8:"CoCreate";i:6;s:4:"CREO";i:7;s:10:"DraftSight";i:8;s:2:"NX";i:9;s:7:"Onshape";i:10;s:12:"Pro/Engineer";i:11;s:10:"Solid Edge";i:12;s:10:"SOLIDWORKS";i:13;s:16:"Unigraphics (NX)";}
                            [software_often] => 21
                            [opt-in] => 
                            [joined_with] => 
                            [permalink] => mrjentis
                            [updated] => 2017-03-29 16:37:42
                            [pass_code] => de96a3d40497cc0903c9ee0b263e8bee
                            [pass_code_created] => 2015-08-10 14:36:13
                            [pass_code_used] => 2015-08-10 14:32:49
                            [rememberMe] => 7483ff4358c0a91d0948e267d484c314|f2a6f92fe023e1d196aa1981c85526e9
                            [exchangeSetting] => 1
                            [onshape] => 
                            [company_name] => 
                            [address] => 
                            [address2] => 
                            [deskeng] => 
                            [contract_work] => 1
                            [machinedesign] => 
                            [software_often_text] => SOLIDWORKS
                            [experience] => 
                            [education] => 
                            [certifications] => Array
                                (
                                    [0] => stdClass Object
                                        (
                                            [id] => 297
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional - Mechanical Design
                                            [number] => License C-3ACTMB6VS9
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:01
                                            [updated] => 2015-01-10 19:54:01
                                        )

                                    [1] => stdClass Object
                                        (
                                            [id] => 298
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Drawing Tools
                                            [number] => License C-UHGP5H4F6X
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:32
                                            [updated] => 2015-01-10 19:54:32
                                        )

                                    [2] => stdClass Object
                                        (
                                            [id] => 299
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Mold Tools
                                            [number] => License C-9XG262PFEK
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:54:59
                                            [updated] => 2015-01-10 19:54:59
                                        )

                                    [3] => stdClass Object
                                        (
                                            [id] => 300
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Sheet Metal
                                            [number] => License C-HG6F5YWFZ3
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:55:21
                                            [updated] => 2015-01-10 19:55:21
                                        )

                                    [4] => stdClass Object
                                        (
                                            [id] => 301
                                            [uid] => 5451
                                            [type] => Certified Solidworks Professional – Advanced Surfacing
                                            [number] => License C-GDEGS7J5QW
                                            [recieved] => 2014
                                            [added] => 2015-01-10 19:56:24
                                            [updated] => 2015-01-10 19:56:24
                                        )

                                    [5] => stdClass Object
                                        (
                                            [id] => 302
                                            [uid] => 5451